Welcome to my shop
Product Overview
ADF4350 ADF4351 PLL RF Signal Source Frequency Synthesizer Development Board
Detail
It can be controlled by the upper computer official software.
All control pins are leaded out for convenient operation.
Default + -50ppm 25M active crystal oscillator.
Three-wire serial peripheral interface bus lead to control pin and state locking pin, allowing all functions including point frequency sweep and frequency hopping.
Output frequency range: 138-4.4GHz(ADF4350) ,35MHz - 4.4GHz(ADF4351)
Supply voltage: 4-9V (5VDC)
Output signal:
2.2GHZ--4.4GHz sine wave (fundamental)
35MHZ--2.2GHz squarewave (fundamental division)
Output signal: output speed, signal strength: + 5dBm (programmable)
RF connector: SMA female head
Control Interface: Three-wire Serial Peripheral Interface Bus
Reference Clock: 10.000MHZ (default), through the interface to an external SMA
Size: Approx. 4.8 x 4.9cm / 1.89 x 1.93inch
Weight:15g
The module can pin microcontroller LCD1602 / LCD12864 module connection (can be plugged directly Backward), convenient software debugging, both lock indicator (Lock). Pin correspond to the following:
1.GND ------------------------- GND
2.VDD (5V) ------------------- VCC
3.VO -------------------------- NC (empty)
4.RS -------------------------- NC (empty)
5.R / W ------------------------- MUXOUT
6.EN -------------------------- CLK
7.DB0 ------------------------- DATA
8.DB1 ------------------------- LE
9.DB2 ------------------------- CE (has 10K pullup)
10.DB3 ------------------------- GND (do not take)
Reference Clock:
10.000MHZ default reference clock signal is active clock or an external reference clock signal, you need to modify the three-way connection with a soldering iron, connect EXT_REF external reference signal.
For ease of use, the default is broadband output, the output of two differential signals, one way can be used to output use, the other way can be used to monitor the output.
1 x ADF4350/ADF4351 RF Signal Source Frequency Synthesizer
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
3. Payment must be received 4 days after auction ended.
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.