SHIPPING FROM IN THE USA!

 

Real Carbon Fiber Sticker Interior.

Made with high quality glossy carbon fiber with gel coat.

 

Real Carbon Fiber, not vinyl.

 

Come with self-adhesive tape for easy installation.

 

Installation

Make sure the target surface is clean and dry before applying.

 

Peel off backing and press sticker slowly and firmly on the desired area.

 

LET SIT AT LEAST 24 HOURS FOR ADHESIVE TO REACH MAXIMUM

1. Avoid bending when clear coat is hard due to cold climate maybe result crack.

2. Product required to be heated until flexible before install. Best is to place in the sun for about 3-5 mins till flexible and heated evenly. Or use dryer to make it flexible enough to fit the interior contour.

3. Clean interior surface few times with tooth brush and hot water ensure wax removal for better sticking surface, then wipe / dryer til fully dry before sticking.

4. Press and hold firmly few mins. Check in the few days after installed maintain press hold if come loose due to climate temperature.

**5. European cars interior have environmental friendly coating will preventing double side from sticking. this may required to use epoxy glue to secure in place.