This all-aluminum radiator provides maximum cooling efficiency and prevents premature engine failure. The advantages that are heat transfer aluminum using tube and fin design can significantly increase the heat surface area, so that heat more efficient dissipation.It's built tough for improved reliability, airflow, and cooling.
OE matching quality designed, manufactured and thoroughly tested according to OE requirements.
Easy installation perfect finish and direct fit, enabling a quick and smooth product installation.
Fits:
Year | Make | Model | Engine |
1996 - 2006 | GMC | Sierra 1500 | 4.8/5.3L V8 |
1996 - 2006 | Chevrolet | Sierra 1500 | 4.8/5.3L V8 |
Specific and characteristics
-DPI:2334(28-14/"core)
-Condition: 100% Brand new
-Type:Radiator+Transmission cooler
-Core Size:28 1/4" x 17 1/4 " x 1 2/3 "
-Overall Size:34" x 21 1/2" x 4 7/8"
-Import:1 1/2"
-export:1 3/8"
-Rows:3
-Transmission cooler:Include
-Transmission:Automatic Transmission/Manual Transmission
-Material: All Aluminum
-Surface Finish: Metallic Finish
Notice: 1.Please be sure to check the compatibility chart above to confirm the fitment of the item to your vehicle before completing your purchase.
2.Overall Size are absolute measurements. Height is from top of radiator cap to bottom of the supporting pins. Width is from side to side. 3.ONLY FOR core width is 28 1/4", Not for core width 34". Please measure your old radiator before place order.How to replace the radiator:
1:Disconnect the battery.
2:Drain the radiator fluid into a suitable container.
3:Remove the old radiator:
-Take off any plastic covers around the radiator.
-Disconnect the electrical connector to the fan, and unbolt and remove the fan assembly.
-Disconnect the radiator hoses from the radiator.
-Remove any clamps, brackets, or screws holding the radiator inside its frame.
-Lift the radiator up and out of the car.
4:Install the new radiator:
-Slide the new radiator into place.
-Connect any clamps or brackets that hold the radiator in place.
-Connect the transmission cooling lines carefully.
-Connect the engine cooling hoses to the radiator.
-Replace the fan and fan shroud.
-Reconnect the fan electrical connection.
-Replace the plastic covers.
5:After loading the product on your vehicle and adding the coolant, tighten the rotary cover and leave your vehicle idling for 10-20 minutes. After completely cooling the coolant, open the cover and fill the product with coolant. Please make sure there is no gas in the product.
6:Check your work to make sure that there are no leaks.
(Tools need to be prepared: Screwdrivers, Wrenches, Drain pan)
Note: Do please keep children and pets away when replacing the radiator