Check out our other listings for scooter grip tape -

Plain

Check & Patterned

Arrow & Diamond

This Scooter Grip Tape is available in 2 sizes.  Please make sure you measure and order the correct size.

Standard Length - 41cm in length and 11.5cm in width (Approx)

Full Deck Length - 55cm in length and 11.5cm in width (Approx)

STANDARD LENGTH

The Standard Length of Scooter Grip Tape measures approx. 41cm in length and 11.5cm in width.  It will fit all JD Bug, Grit, Madd, Micro, Razor, Slamm and most brands of other push scooters.

This grip tape is rectangular in shape and fits between the head section and the brake.  It will require some cutting to fit.  Using the offcuts you should have enough spare to cover the rear drop outs.

FULL DECK LENGTH

The Full Deck Length of Scooter Grip Tape measures approx. 55cm in length and 11.5cm in width.  It is long enough to cover the whole scooter deck, including drop outs, on all JD Bug, Grit, Madd, Micro, Razor, Slamm and most brands of other push scooters.

The grip tape is rectangular and will need to be cut to shape.  The easiest way of fitting this grip tape is to either create a cardboard template of the shape required and copy this to the grip or if you already have full length grip attached to your scooter use this as a template in the same way as above.

Fitting is easy as the grip tape is self adhesive.  First remove all old grip tape, ensure that the scooter is clean, dry and free from grease, cut the new piece to the required length, peel off the backing, stick it to the foot plate and trim the edges using a stanley knife.

Colours may vary slightly to those shown.

The Grip Tape is folded loosely for delivery.  Any creases or folds created during delivery will disappear once the grip is stuck.