FEATURES:

THICK AND HIGH QUALITY - have excellent thermal insulation effect, with anti-scratch layer on the surface, friction resisting, won’t fade nor blister.

HEAT INSULATION AND ENERGY SAVING - blocking out 85% of infrared rays, retain heat in winter and keep it out in summer, energy saving. 10% of VLT meaning practical reduce Light.

EFFECTIVE UV REJECTION - blocks out 97% of UV rays, prevent and reduces fading and aging of interior furnishings.

PRIVACY PROTECTION - great intend privacy during daytime; the privacy-effect is reversed at night since the interior will be exposed to more light than the exterior.

STATIC CLING AND NON-ADHESIVES - glue-free design, no chemical release.

EASY TO INSTALL - make sure window surface is completely clean and absolutely free of any blemishes, remember to use a lot of soap/water mixture to soak both the adhesive side and window.

 

SPECIFICATION:

Film Type: One Way Mirror

Material: PET

Color: Black&Sliver/Sliver

Visible Light Transmission: 15%

Infrared cut: 88%

Visible Light Reflectance: 8%

Thickness of Base Film: 2.0MIL=0.15mm

Size:

Length:100/200/300/500cm

Width:40/50/60cm

PACKAGE INCLUDES:

1x Heat Insulation Privacy Film

 

Installation Steps:

Step 1. Measure the window and cut the film into the right size.

Step 2. Clean and wet the glass with a lot of soapy water.

Step 3. Make sure to remove the backing protective sheet

Step 4. Put the film on the glass and slide to align

Step 5. Squeegee away air bubbles and excess water with a scraper or hard card.

Enjoy!

Tip 1: Only applies on the flat, clean, smooth glass surface. Make sure no glue, dust, or residue on the glass, especially window conners.

Tip 2: Trim away the edges. Leaving a gap of 1/2 inches between the film and window frame. Do not connect to the window frame.

Note: Always only reflects the bright side. Remember to draw a curtain during night.