WELCOME TO MIDATLANTICLOCKSMITH
:ABOUT US:
WE ARE A SMALL LOCKSMITH SUPPLY COMPANY WITH OVER 12 YEARS OF EXPERIENCE. UNTIL NOW WE HAVE KEPT OUR BUSINESS ONLY LOCAL TO THE GENERAL PUBLIC. WE NOW HAVE DECIDED TO EXPAND OUR MARKET AND MAKE OUR KEYLESS ENTRY SERVICES AVAILABLE ONLINE. PLEASE BID IN CONFIDENCE AS YOU ARE ASSURED A QUALITY PRODUCT, FAST DELIVERY, AND A GREAT ONLINE SHOPPING EXPERIENCE.
:FOR SALE:
OEM SUBARU keyless entry remote fob
++NOT RECASED OR REMANUFACTURED++
NO CRACKED OR CHIPPED CASE AND NO WORN OFF BUTTONS
REMOTE HAS BEEN TESTED AND IS IN 100% WORKING ORDER
FCC ID: NHVWB1U711
IC: 3495A-WB1U711
MADE IN JAPAN
:WORKS WITH:
2005 2006 2007
SUBARU OUTBACK
2005 2006 2007 2008 2009 2010 2011 2012 2013
SUBARU IMPREZA
2005 2006 2007 2008 2009 2010 2011 2012 2013
SUBARU FORESTER
2006 2007
SUBARU B9 TRIBECA
2005 2006 2007 2008 2009 2010 2011 2012 2013
SUBARU LEGACY
MAY WORK WITH OTHER MODELS AND YEARS. BE SURE TO CHECK WITH YOUR LOCAL DEALER BEFORE BIDDING.
MAKE SURE YOUR CURRENT REMOTES FCC ID NUMBER MATCHES THIS REMOTE BEFORE PURCHASE
:PROGRAMMING:
GENERAL PROGRAMMING WILL BE POSTED AT THE BOTTOM OF THE PAGE.
WE CAN NOT GUARANTEE THESE INSTRUCTIONS WILL WORK FOR YOUR VEHICLE.
THE REMOTE CAN BE TAKEN TO YOUR LOCAL DEALER OR LOCKSMITH TO BE PROGRAMMED OR MAY BE RESEARCHED ONLINE.
:PAYMENT:
PLEASE MAKE ARRANGEMENTS TO PAY FOR THE ITEM WITHIN 3 DAYS OF AUCTIONS END
:WARRANTY:
ALL TRANSMITTERS CARRY A STANDARD 30 DAY WARRANTY.
WARRANTY'S WILL COME IN THE FORM OF A REFUND OR REPLACEMENT.
:SHIPPING:
ALL ITEMS ARE SHIPPED WITHIN 2 BUSINESS DAYS OF RECEIPT OF PAYMENT.
ITEMS WILL BE SHIPPED USPS FIRST CLASS MAIL WITH DELIVERY CONFIRMATION.
ANY QUESTIONS PLEASE EMAIL THROUGH EBAY
THANK YOU
Programming new remotes
The keyless entry system is equipped with a code learning feature that allows you to program new transmitter codes into the system or to delete old ones.
The system can learn up to four unique transmitter codes. The four transmitter codes may be the same or different.
To register a new transmitter� with the keyless entry system, it is necessary to program the transmitter's code (identification number) into the system.
A label showing the code is affixed to the bag containing the transmitter, and another is affixed to the circuit board inside the remote.� If there is no bag, open the remote and make a note� of the eight-digit number.
�the code is also inside the remote transmitter
Programming the remote transmitter code (from the owners manual)
read through this first since eveything needs to be done in a quick sequence
1. Sit in the driver's seat, close all doors and the rear gate or trunk lid etc
2. Open and close the driver's door one time.
then� Within 45 seconds
3. open and close the driver's door once
4. turn the ignition key from LOCK to ON 10 times within 15 seconds.
An electronic tone will sound once, a buzzer will continue to sound and the interior light will continue to flash until the transmitter codes are completely registered.
If you do not perform the steps above within 45 seconds an error will occur and neither an electronic tone� nor� the� buzzer� will� sound and the interior lamp will not flash. In this event, start all over again.
Within 45 seconds do the following
Open and close the driver's door once within 15 seconds and an electronic tone will sound for 30 seconds. If� you do not perform the operations within 15 seconds an error will occur and the electronic tone will not sound. In this event, perform the registration steps again beginning with # 3 above.
Ok, here is the fun part...
Before the electronic tone stops, press the power door lock button to LOCK the same number of times as the leftmost digit of the transmitter code.
For example, press the LOCK button 8 times if the leftmost digit of the code is 8. If the number is 3 then LOCK the door 3 times etc...
When you have finished entering the number, push to UNLOCK side within five seconds and
Then do that for all the remaining 7 digits of the code. After each series pull the lock knob to the UNLOCK side within five seconds.
When you are finished, within 5 seconds push that LOCK button to UNLOCK one time and then do it all again, the full series.
Yes, once again start with the left digit and re-enter each one using the lock button within a few seconds.
When you have entered the� eighth� digit the second time an electronic tone will sound for 30 seconds.
The electronic tone will stop sounding when you start entering the number. If you do not start entering the number using the lock knob before the electronic tone stops sounding, an error will occur. In this event, perform the registration steps again beginning with part 3 above.
If the interval between one push of the knob and the next exceeds five seconds, an error will occur.
In this event, perform the procedure again beginning with part 4. If an error occurs six times, perform the procedure again starting with part 3.
If the code entered the second time is not identical to the code entered the first time, an error will occur. In this event, perform the procedure again beginning with part 5. If an error occurs five times, perform the procedure again starting with part 3.