• ITEM FEATURES AND ADVANTAGES:
  •  
    • Fits Vehicles of the Following Years and Make :
         1992-96 Toyota Camry L4 2.2L
  •  
  • Quick Complete Rear Strut & Coil Springs Assembly Pair For 1992-96 Camry Toyota

    ITEM FEATURES AND ADVANTAGES:

     

    • Fits Vehicles of the Following Years and Make :

         1992-96 Toyota Camry L4 2.2L

     

    • Set Quantity: 2 Pieces
    • Warranty: 1 Year
    • Direct Fit - Ready to Install - No Special Tools Requir
    • High stability. To optimize body tilt for cornering.
    • Good shock absorption effect. Eliminate abnormal noise, driving and riding more comfortable.
    • Save oil. Reduce the wear of tires and chassis.
    • Accurate size. According to the original factory technology and quality standards design and production, accurate matching models.
    • High quality materials. Made of fine materials, not easy to deformation, fracture damage, high corrosion resistance, prolong the service life, improve driving safety and comfort.
    • 100% Brand new.

     

     

    PRODUCT STRUCTURE DIAGRAM AND DETAILS:

     

     

     

    HOW TO INSTALL:

     

     

    NOTES FOR REPLACEMENT:

     

    • Before installation, pay attention to whether the type of shock absorber is the same as the type, and pay attention to whether the shock absorber is left or right.

     

    • Check the quality of the shock absorber before installation, such as whether there is oil leakage and whether it is sealed.

     

    • When removing the shock absorber of the original car, the position corresponding to the top rubber and the spring should be marked first.When replacing the shock absorber, make sure the top glue is aligned with the original mark of the spring.Failure to do so may result in abnormal sound in the suspension system.

     

    • Please use professional tools to install the shock absorber. Please do not install it forcibly by hand, so as not to cause scratches on the shock absorber piston rod and lead to oil leakage.

     

    • Make sure the shock absorber is installed in the correct position.

     

     

    FREQUENTLY ASKED QUESTIONS:

     

    1.If one of the shock absorbers fails, do I need to replace the other shock absorbers at the same time?

    • We suggest that it is better to replace the shock absorbers with new ones on both sides at the same time. And new shock absorbers produced by the same manufacturer are better, so as to ensure the same performance of the shock absorbers on both sides of the vehicle. If only one is replaced, it will cause the phenomenon that one is new and the other is old, which will lead to uneven tension, the operation of parts is not in place, and will accelerate the damage of the car and parts.

         

    2How to judge whether the shock absorber is broken?

    • (1) Shock absorber leaks. The outer surface of ordinary shock absorber is dry and clean. If there is oil leakage, the hydraulic oil in the shock absorber leaks from the upper piston rod. In this case, the shock absorber is basically invalid.

       

    • (2) When a car passes over a bumpy road or speed bump, the wheels make a "bang" sound, indicating that the shock absorbers on the wheels are invalid or damaged.

       

    • (3) When the car is steering, the roll Angle of the car body increases significantly, and even sideslip may occur in serious cases. This indicates that the shock absorber is broken and that its damping force is too small to effectively suppress the compression of the spring.

       

    • (4) After a period of driving on a rough road, if the temperature of the shock absorber shell is cold, it means that the shock absorber has been damaged.Because under normal conditions, the shock absorber shell is warm.

     

    3. Why is there still abnormal noise after installation?

    • The top nut is not tightened after landing.
    • The new shock absorber uses the old nut.
    • The top glue gap wear is too large.
    • Plane bearing wear.
    • The top fixed installation position is offset.
    • Buffer block or dust cover mismatches
    • Angle fixed torque deviation.

     

    4.Is it better to replace the ordinary shock absorber or the complete shock assembly?

    • The suggestion is to replace the complete shock assembly.Because the ordinary shock absorber is a part of the  complete shock assembly, it is difficult to replace the independent shock absorber, which requires professional equipment and personnel and takes a long time.Replacing the shock absorber assembly requires only a few screws, which is easy to operate.And the price of the parts in the separate replacement shock absorber assembly is high, and the replacement shock absorber assembly is cost-effective.

     

    5. How often does the shock absorber need to be replaced?

    • (1) When the mileage of the vehicle reaches 80000km-100000km;
      OR (2) When the vehicle has been used for 60 months.

     

     

     



    Payment

    1.We accept multiple payment methods, such as PayPal, VISA, Master, etc..

    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 10 days as auction ended or order might be delayed.

    Shipping
    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
    3. The images shown are not the actual item and are for your reference only.
    4. Fast shipping:All our packages use USPS First Class Package Service
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!
    Returns

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    Feedback
    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    2. It is impossible to address issues if we do not know about them!
    Warranty
    1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
    2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
     
    You agree to all of the above-listed policies upon bidding on and winning this auction!

    Seller Level
    Weekly Special Sell
    Shop Category
    Quick Complete Rear Strut & Coil Springs Assembly Pair For 1992-96 Camry Toyota

    ITEM FEATURES AND ADVANTAGES:

     

    • Fits Vehicles of the Following Years and Make :

         1992-96 Toyota Camry L4 2.2L

     

    • Set Quantity: 2 Pieces
    • Warranty: 1 Year
    • Direct Fit - Ready to Install - No Special Tools Requir
    • High stability. To optimize body tilt for cornering.
    • Good shock absorption effect. Eliminate abnormal noise, driving and riding more comfortable.
    • Save oil. Reduce the wear of tires and chassis.
    • Accurate size. According to the original factory technology and quality standards design and production, accurate matching models.
    • High quality materials. Made of fine materials, not easy to deformation, fracture damage, high corrosion resistance, prolong the service life, improve driving safety and comfort.
    • 100% Brand new.

     

     

    PRODUCT STRUCTURE DIAGRAM AND DETAILS:

     

     

     

    HOW TO INSTALL:

     

     

    NOTES FOR REPLACEMENT:

     

    • Before installation, pay attention to whether the type of shock absorber is the same as the type, and pay attention to whether the shock absorber is left or right.

     

    • Check the quality of the shock absorber before installation, such as whether there is oil leakage and whether it is sealed.

     

    • When removing the shock absorber of the original car, the position corresponding to the top rubber and the spring should be marked first.When replacing the shock absorber, make sure the top glue is aligned with the original mark of the spring.Failure to do so may result in abnormal sound in the suspension system.

     

    • Please use professional tools to install the shock absorber. Please do not install it forcibly by hand, so as not to cause scratches on the shock absorber piston rod and lead to oil leakage.

     

    • Make sure the shock absorber is installed in the correct position.

     

     

    FREQUENTLY ASKED QUESTIONS:

     

    1.If one of the shock absorbers fails, do I need to replace the other shock absorbers at the same time?

    • We suggest that it is better to replace the shock absorbers with new ones on both sides at the same time. And new shock absorbers produced by the same manufacturer are better, so as to ensure the same performance of the shock absorbers on both sides of the vehicle. If only one is replaced, it will cause the phenomenon that one is new and the other is old, which will lead to uneven tension, the operation of parts is not in place, and will accelerate the damage of the car and parts.

         

    2How to judge whether the shock absorber is broken?

    • (1) Shock absorber leaks. The outer surface of ordinary shock absorber is dry and clean. If there is oil leakage, the hydraulic oil in the shock absorber leaks from the upper piston rod. In this case, the shock absorber is basically invalid.

       

    • (2) When a car passes over a bumpy road or speed bump, the wheels make a "bang" sound, indicating that the shock absorbers on the wheels are invalid or damaged.

       

    • (3) When the car is steering, the roll Angle of the car body increases significantly, and even sideslip may occur in serious cases. This indicates that the shock absorber is broken and that its damping force is too small to effectively suppress the compression of the spring.

       

    • (4) After a period of driving on a rough road, if the temperature of the shock absorber shell is cold, it means that the shock absorber has been damaged.Because under normal conditions, the shock absorber shell is warm.

     

    3. Why is there still abnormal noise after installation?

    • The top nut is not tightened after landing.
    • The new shock absorber uses the old nut.
    • The top glue gap wear is too large.
    • Plane bearing wear.
    • The top fixed installation position is offset.
    • Buffer block or dust cover mismatches
    • Angle fixed torque deviation.

     

    4.Is it better to replace the ordinary shock absorber or the complete shock assembly?

    • The suggestion is to replace the complete shock assembly.Because the ordinary shock absorber is a part of the  complete shock assembly, it is difficult to replace the independent shock absorber, which requires professional equipment and personnel and takes a long time.Replacing the shock absorber assembly requires only a few screws, which is easy to operate.And the price of the parts in the separate replacement shock absorber assembly is high, and the replacement shock absorber assembly is cost-effective.

     

    5. How often does the shock absorber need to be replaced?

    • (1) When the mileage of the vehicle reaches 80000km-100000km;
      OR (2) When the vehicle has been used for 60 months.

     

     

     



    1.We accept multiple payment methods, such as PayPal, VISA, Master, etc..

    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 10 days as auction ended or order might be delayed.

    1. Orders processed within 24 hours of payment verification.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)
    2. We only ship to confirmed PAYPAL addresses. Your PAYPAL address must match your Shipping address.
    3. The images shown are not the actual item and are for your reference only.
    4. Fast shipping:All our packages use USPS First Class Package Service
    5. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

    1. You have 7 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

    4. Return shipping is to be paid by the Buyer.

    1. We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
    2. It is impossible to address issues if we do not know about them!
    1. 12 months Manufacturer's Warranty for defective items (excluding items damaged and/or misused after receipt). Accessories come with a 3-month warranty.
    2. Defective items must be reported and returned to us within the warranty period (and in the original packaging, if possible). You must tell us what the defect is and give us your eBay ID. we do not repair or replace items with an expired warranty.
     
    You agree to all of the above-listed policies upon bidding on and winning this auction!

    Copyright of CCIYU-AutoParts_All rights reserved.