Feature:
1. This product is suitable for 12V car tires
2. Also suitable for motorcycles, bicycles, ball games, rubber boats, beach floating beds, inflatable toys, etc.
3. On the highway, in the wild or at work in the morning, the tire suddenly leaks or the tire is injected, which can be used for first aid.
4. Maintaining the correct tire pressure in the car tires can ensure driving safety and save gasoline.
5. Equipped with a complete set of inflatable nozzles, which can be used to inflate tires, rubber boats, air cushions, inflatable toys, balls and many other purposes
6. The product adopts high-performance permanent magnet metal motor, which has lower power consumption, lower noise and longer service life
7. The cigarette lighter of the product is equipped with a 10A fuse, which will automatically cut off when overloaded. Say goodbye to the cumbersome and cumbersome power supply of the point clip to prevent the voltage from being too large and damage your car.
8. The product does not need tedious screwing, press-button inflation, tight and leak-proof, one-click, wear-resistant nylon braided tube is resistant to high temperature, explosion-proof, frost-proof and not broken
9. The product has a 3m long power supply line, which provides a large enough range of inflation. Various models can ensure that all four wheels can be inflated.
10. The body of the product is equipped with bright LED lights, and no other lighting tools are required for inflation at night, just press the lighting button to turn on the lights
11. Meet the needs of different people, smart and more convenient, tire pressure detection, rapid inflation

S   pecifications
Product size: about 14.5*6*20.5cm
Product material: ABS
Power cord length: about 300cm, trachea length about 50cm
Output power: 120 (W)
Rated voltage: DC12 (V)
Product lighting: LED
Product pressure: 150PSI
Product air volume: 30L/MIN
Air flow: 25L/min
Cylinder specification: single cylinder

Product Usage:
It is suitable for the air pressure range within 3.5bar, small bridge car, off-road vehicle, regular car inflatable, but also suitable for motorcycles, bicycles, ball games, inflatable pads, kayaks, etc.

Products include:
1* Gas-filled mercury
1*fuse
3*Additional Nozzles
1*Instruction

Instructions for use: the following points
1. Insert the air nozzle on the rubber tube head directly into the tire valve. When you hear the sound of air leaking from the tire, it means that the air has been circulated. Continue to tighten the air nozzle, and the air will no longer leak out.
2. Insert into the DC12V cigarette lighter
3. When inflating, the pointer of the meter rises with the tire saturation. When the pointer reaches the appropriate tire pressure (general car tire tire pressure is 223kpa=35PSI), take out the plug and air nozzle, and the work is completed.
4. Please use the professional ball needle and plastic nozzle equipped with this machine to connect with the air nozzle to inflate the balls and other air-requiring equipment.

Note: the following points
1. Do not inflate tires on large and overweight vehicles, such as trucks, large trucks, container trucks, etc.
2. When using, please start the car engine to enhance the power, and do not consume the car battery power
3. This machine can only use DC (DC12V) power supply, and cannot use household high-voltage AC (AC220V) power supply
4. When inflating, please stop for 10 minutes after continuous work for 10 minutes for cooling to prevent damage to the air pump and accessories, and to prolong the life of the motor. When the rubber boat is inflated, it can work continuously for 30 minutes;
5. Generally, when the tire is inflated, it can reach the normal tire pressure of 30PSI in about 3-5 minutes, and it will take a little longer for a large tire; if the pointer of the instrument rises rapidly to 50-100PSI when the inflation starts, it means that the air is blocked. , the air does not enter the tire. At this time, you need to immediately unplug the air nozzle connector and re-operate, otherwise the motor and instrument will be easily damaged.
6. When using, people should not leave the body, pay attention to the tire pressure at any time, and not be too saturated
7. After the machine is used, the air nozzle wrench must be straightened to avoid fatigue of the rubber elasticity inside.
8. The air pump plug is equipped with a fuse. If the air pump does not start, please open the plug to check and replace it (the fuse is 10A)
9. The machine should avoid moisture, heavy fall and sand and mud invasion, and avoid children playing with it to avoid damage.
10. The pressure required for each tire is different, please refer to the label on the side of the car tire, or ask the car manufacturer