For sale
IMPORTANT
ALLOW APPROX 2 WEEK FOR FINAL ASSEMBLY & TEST
Hello Tannoy Fans ..
Firstly, apologies, we have many crossovers for sale,
we sold over 1000 pairs so far, for many models, from under £200 to over £800,
from great new caps types, to PIO (Paper in Oil) vintage caps,
hand made to top quality PCB types,
so, if you are confused, just send me an email …
Tell me, approx budget, your drivers, your cabinet, your wishes,
I will make suggestions from low too high.
We are the No 1 provider in the world of new crossover solutions.
The all new Mk3 A series Tannoy Speaker Crossover
We have 5 types of crossover now.
A Series Mk3 (our best selling model) this listing
GB Series (A series in “grey box” for Silvers & Reds) other listing
VS Clarity ESA series other listing
VS Jantezen Superior Z-Caps other listing
VS Clarity MR other listing
Let me know your model and cabinet when ordering.
This listing covers
“Silver” & “Reds” LSU/HF/12/L, LSU/HF/15/L, 3LZ, 111LZ
“Golds” LSU/HF/12/8, LSU/HF/15/8, LSU/HF/111LZ/8
HPD295, HPD315, HPD385
We keep being asked this question.
This is so important, we sell the only crossovers on Ebay,
with CORRECT point to point PCB track wiring,
open visible tracks, no solder resist, with space between tracks, correct audio design,
see pic 3, its like hand wiring. For that reason alone
there is no comparison, we make the finest crossovers available anywhere.
So what’s new in the Mk3 ??
Bigger PCB size -
allows room for more & different components, bigger inductors,
bigger capacitors (old was 150 x 150mm, new is 150 x 250mm).
Better gold plated tracks on 2oz copper. Military grade PCBs.
UNIQUE easy to use link jumpers ROLL ON / ROLL OFF - for treble standard, cut & boost,
better than original as you have flat, cut & boost, (all models).
Link jumper for 3kHz notch on/off (for Reds & Silvers when needed).
Jumper link for 25 / 50 ohm link option (all models).
Who are MainlyTannoy ?
We have been working with Tannoy products since 1973, PA, install, churches,
theatre etc.
I have been in the
electronics business for more than 30 years, making products for many well
known companies,
like Naim Audio, Snell, BBC, BT. We have
supplied more than 1000 crossovers to date, over 8 years.
Almost all
the published data has errors and we have all the values correct,
getting support directly from
Tannoy in Scotland themselves.
Common
questions answered ?
Yes, our crossovers are the best available
on Ebay, no doubt.
Our lowest cost is £160 a pair, no wires, no 4 pin plugs .. IMPORTANT if you
are comparing prices.
We also offer all the way to fully
plug and play, hard wired input wires,
hard wired output wires with
wonderful 4 pin plugs.
(When ordered, the 4 pin plugs are £22 each, £44 a pair alone !!).
Of course, any more questions welcome.
The old crossover issues.
The old crossovers never had the
best capacitors, but that was all there was then,
plus they are 40 to 50 years old and worn out, plus all the silly thin tracks,
thin wires and silly switches that oxidise, so the upgrade is VERY
noticeable.
You get an improvement at all frequencies, the bass is less
woolly,
mids are clearer and the hi's much brighter.
The only PLUG & PLAY.
We offer the only FULLY FINISHED “plug and play” crossovers on Ebay …
complete with input wires and output cables with new very
superior 4 pin Gold plugs.
(If you order that version)
FULL SPECIFICATION:
Specifically designed for:
“Silver” & “Reds” LSU/HF/12/L, LSU/HF/15/L, 3LZ, 111LZ
“Golds” LSU/HF/12/8, LSU/HF/15/8, LSU/HF/111LZ/8
HPD295, HPD315, HPD385
The Mk3 version:
Bigger size - allows room for more & different components, bigger inductors, bigger capacitors (old was 150 x 150mm, new is 150 x 250mm).
Better gold plated tracks on 2oz copper. Military grade PCBs.
Link jumpers - for treble standard, cut & boost, bit like old Tannoy roll on / roll off (all models).
Link jumper for 3kHz notch on/off (for Reds & Silvers when needed).
Jumper link for 25 / 50 ohm link option (all models).
Link 1 – there is a parallel resistor after the main HF inductor, some say it should be 25 ohms, some say 50 ohms, Tannoy Scotland say 50 ohm. TIP .. our view is 50 ohm is best, but feel free to fiddle and you decide. If you have no idea .. stick to the 50 ohm setting. It makes little difference.
Link 2 & 3 – these adjust the HF .. complicated but simply .. in most cases standard mode (=30 ohm) is best. We call this “STANDARD LEVEL MODE”. Choices are for “BOOST” & “CUT”. There are links for this. Why ?? For enhanced cabinets like horn loaded GRF, where extra bass is produced, you can boost the treble to balance.
Treble cut mode – jumper link on B & D.
Standard mode – jumper link on A & D.
Treble boost - jumper links on A & C.
Link 4 “3kHz notch “honk” filter” – Tannoy “Silver” & “Reds” as the are known, had very simple crossovers, and there was a “honk” at about 3kHz. This link switches in or out the “3kHz honk filter”. Many customers replacing old “grey box” crossovers for Silver and Reds, got to like these extra 3kHz frequencies, so they can choose to “have them” or not. TIP in most circumstances, we suggest “3kHz on” is best.
Let me know your model and cabinet when ordering.
Track design - gold plated tracks on 2oz copper, using a high grade 1.6mm FR4 (high grade flame retardant) printed circuit board, track layout designed with the “star” earthing principle, with 2 separate isolated independent circuits, one for HF, one for LF
Mounting – conveniently provided with 6 black grommets are provided as mounting “spacers”, along with 6 suitable screws.
The sound - Your speakers will be just that bit fresher and brighter, customer’s say a vail is removed with these, especially over the old the models having the roll on / roll off switches. Based closely on the Tannoy circuits, with a few tweaks.
Use as an upgrade over the Tannoy standard crossovers with the switches,
or replacement if yours is missing or faulty. Full frequency tested with from 10 to 30kHz.
Input cables – (if ordered) set up for standard 2 wires use, also for 4 wire bi-amp. –
There are 2 separate isolated circuits, one for HF and one for LF, then 4 input cables are provided will be quality copper 1.0mm sq also.
For regular 2 wire input, just connect 2 reds and 2 black together.
Output cables - (if ordered) supplied with 4 output cables (2 for LF, 2 for HF),
1 metre (longer on request) with quality copper 1.0mm sq wire
and our own designed very superior new Gold plated aircraft grade speaker plugs.
Cable options:
1) no wires at all, terminal blocks
2) with input & output wires (no 4 pin plugs)
3) with input & output wires with new 4 pin plugs.
Some of my feedbacks for crossovers:
Tannoy crossovers Silver Gold Red HPD etc
Great product, works well & received in good order.
Tannoy crossovers Silver Gold Red HPD etc
Very happy with the product, excellent service. Highly recommended.
Tannoy crossovers Silver Gold Red HPD etc
Tannoy dual concentric RED 15 inch crossover network very well made! Thanks!
Tannoy crossovers Silver Gold Red HPD etc
AA, A Perfect Transaction, Highly recommened.
"I series" Hand made Tannoy crossovers Silver Gold Red HPD LRM SRM LGM SGM etc
Top Ebayer
"T series" Hand made Tannoy crossovers Silver Gold Red HPD LRM SRM LGM SGM etc
Professionally assembled, sound fresh and good tonal balance even at louder volume.
No
negative feedbacks please, we always resolve.
I
had a few negative feedbacks, on low value items,
buyer
never even made contact, thanks people,
hope
someone does the same to you.
“Do
to others, as you would expect to be done to you”.
I’m
a good Ebayer, buy with confidence.
Will
always try combine carriage / shipping costs.
All
photographs are of the actual item I am selling, unless stated.
I
do travel, so check if I am away and next ship date, people often miss.
I
am not responsible for any import duties in your country.
Any
problems must be raised within 5 days of delivery, NO EXCEPTIONS.
Valve
equipment contains dangerous high voltages (over 300VDC),
please
do not buy if you don’t how to use.
If
you feel an item is not as described, or faulty, make contact.
We
will try to find a solution acceptable to all.