ACDelco Professional 15-20514 A/C Compressor

Product Overview

Description

Belt Type: V-belt
Belt Type: V-belt
Clutch Included: Included
Clutch Maximum Diameter: 5.125
Clutch Maximum Diameter: 5.125
Clutch Pulley Diameter (in): 5.12in
Clutch Pulley Diameter (mm): 130.048mm
Coil Clock Position: 2
Coil Voltage: 12
Compatible Refrigerant Oil Type: PAG 150
Compressor Type: A6
Connector Shape: Rectangle
Connector Shape: Rectangle
Connector Terminal Quantity: 2
Connector Terminal Quantity: 2
Distance From Clutch To Mounting Flange: 2.000
Distance From Clutch To Mounting Flange: 2.000
Features & Benefits - Bullet 1: 100% visual- and leak- tested to ensure component's quality and durability
Features & Benefits - Bullet 2: Constructed from quality cores using quality replacement parts
Features & Benefits - Bullet 3: Some ACDelco Gold parts may have formerly appeared as ACDelco Professional
Features & Benefits - Bullet 4: Premium aftermarket replacement part
Features & Benefits - Bullet 5: Manufactured to meet specifications for fit, form, and function for General Motors vehicles as well as most makes and models
Good Maintenance Practices - Section 1 - Bullet 1: Musty smell when the air conditioning or heating system is activated
Good Maintenance Practices - Section 1 - Bullet 2: Inadequate cooling or heating temperatures when using the air conditioning or heating system
Good Maintenance Practices - Section 1 - Bullet 3: The vehicle's temperature gauge indicates a 'red' condition
Good Maintenance Practices - Section 1 - Header: Your vehicle's air conditioning (A/C) system should be routinely checked by a professional technician. This should occur approximately every 12 months, though you should check your owner's manual for more specific recommendations. Any related maintenance should be handled only by professionals. If you notice any of the following conditions, have your vehicle checked right away:
Good Maintenance Practices - Section 2 - Header: Your A/C system requires proper air flow to operate effectively. Poor air flow across the condenser will impact system performance and can increase refrigerant system pressure. Make sure air flow into your system is not obstructed by bugs, leaves, dirt, or other contaminates in between tune ups.
Good Maintenance Practices - Section 3 - Bullet 1: Use the proper O-ring for the system
Good Maintenance Practices - Section 3 - Bullet 2: Thoroughly clean all fittings and do not over torque beyond what is recommended
Good Maintenance Practices - Section 3 - Bullet 3: Always lubricate O-rings with clean refrigerant oil
Good Maintenance Practices - Section 3 - Bullet 4: Always replace sealing caps on service ports
Good Maintenance Practices - Section 3 - Bullet 5: Recover refrigerant from the system when or if necessary
Good Maintenance Practices - Section 3 - Bullet 6: Keep dirt and foreign material from all sealing surfaces
Good Maintenance Practices - Section 3 - Header: Your A/C system is a sealed system, which includes different components connected by hoses, tubes, or lines. To keep the system leak free, inlet and outlet fittings have O-rings or seal washers, and the lines have leak free fittings. To help prevent leaks in the A/C System, follow these guidelines when servicing connections:
Good Maintenance Practices - Section 4 - Header: When replacing your compressor, it is very important to use suction screens and inline filters on liquid lines. These filters and screens will catch any debris in the system to avoid damage to the new compressor. ACDelco also recommends system flushing using native refrigerant before installing a new compressor.
Mounting Type: Direct Mount
Oil Filled: Included
Product Description: ACDelco Gold (Professional) Remanufactured Air Conditioning Compressors are a high quality alternative to Original Equipment (OE) parts. Remanufactured A/C Compressors pump refrigerant through the system. The compressors are typically engine driven via the accessory belt, and a clutch on the compressor is used to engage and disengage the compressor. Hybrid vehicles are typically equipped with an electric motor driven compressor. These compressors draw in cool refrigerant gas from evaporators and pumps it to a much higher pressure. The high pressure gas travels on to the condenser. The compressors are lubricated by refrigerant oil. Remanufacturing A/C Compressors are an industry standard practice that involves disassembly of existing units, and replacing components that are most prone to wear with new components. Damaged and obsolete parts are replaced and are end of line tested to ensure they perform to ACDelco specifications. In addition, remanufacturing returns components back into service rather than processing as scrap or simply disposing of them. ACDelco Gold (Professional) parts are manufactured to meet your expectations for fit, form, and function, making them a smart choice for General Motors vehicles, as well as most makes and models, including special applications. These high-quality parts are backed by General Motors. Some ACDelco Gold parts may have formerly appeared as ACDelco Professional. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Pulley Belt Type: V-belt
Pulley Groove Quantity: 1
Pulley Groove Quantity: 1
Pulley Lip Diameter: 5.125
Pulley Lip Diameter: 5.125
Pulley Ridge Diameter: 5.125
Pulley Ridge Diameter: 5.125
Refrigerant Type: R12 R134A
Refrigerant Type: R134A
Signs of Wear & Troubleshooting - Section 1 - Bullet 1: Lack of or insufficient cooling, excessive clicking sounds, unusual noises, or growling when using the A/C system could be a sign of a worn A/C compressor or components. This could be due to:
Signs of Wear & Troubleshooting - Section 1 - Bullet 2: Internal compressor fault
Signs of Wear & Troubleshooting - Section 1 - Bullet 3: A/C clutch or electrical circuit failure
Signs of Wear & Troubleshooting - Section 1 - Bullet 4: A broken or loose drive belt
Signs of Wear & Troubleshooting - Section 2 - Bullet 10: A/C system component corrosion
Signs of Wear & Troubleshooting - Section 2 - Bullet 11: Missing service cap
Signs of Wear & Troubleshooting - Section 2 - Bullet 1: Worn or damaged service valves and caps
Signs of Wear & Troubleshooting - Section 2 - Bullet 2: Worn hoses
Signs of Wear & Troubleshooting - Section 2 - Bullet 3: Loose connections
Signs of Wear & Troubleshooting - Section 2 - Bullet 4: Seal failures
Signs of Wear & Troubleshooting - Section 2 - Bullet 5: Damaged components
Signs of Wear & Troubleshooting - Section 2 - Bullet 6: Worn or damaged compressor shaft seal
Signs of Wear & Troubleshooting - Section 2 - Bullet 7: Worn or damaged evaporator
Signs of Wear & Troubleshooting - Section 2 - Bullet 8: Worn or damaged condenser
Signs of Wear & Troubleshooting - Section 2 - Bullet 9: Worn or damaged compressor seals
Signs of Wear & Troubleshooting - Section 2 - Header: Your A/C system must be maintained with the correct level of refrigerant and appropriate pressure to work properly. An A/C system leak, which could result in incorrect fluid or pressure levels, could potentially harm or interfere with the performance of your A/C system. This would result in lack of or insufficient cooling performance. Common causes of A/C system leaks include:
Signs of Wear & Troubleshooting - Section 3 - Bullet 1: Use a leak detection dye, such as ACDelco Fluorescent Tracer Dye. Be sure to use the dye that is specified for use with your systems oil and refrigerant type.
Signs of Wear & Troubleshooting - Section 3 - Bullet 2: Look for dirt or containment build up around hose or line connections. This could be a sign that oil, which would attract and hold contaminants, is leaking out of the connection.
Signs of Wear & Troubleshooting - Section 3 - Header: To check your A/C system for leaks:
Switch Included: High Pressure
Switch Service Port: YES
Switch Service Port: Yes
Switch Type: Pressure Switch
Terminal Type: Spade

Interchange

Please review our interchange above in the compatibility table to verify proper fitment of your vehicle. Or contact us for a quick response.
Keep in mind interchange tables apply only to American Market vehicles. If you live outside the USA, please research and verify it fits your vehicle before purchasing.

We ship from multiple warehouses across the country

Please read before purchasing

Shipping and Cancellation Policy

We ship using FedEx and USPS from the nearest available location to you (see a map above). Tracking numbers will be provided as soon as they are generated. We ship to lower 48 states and globally with eBay’s International Shipping Program (eIS).

Most items ship the same business day if ordered before 4:00 PM EST.

Interchange tables are for American Market Vehicles. Contact us for fitment verification on international vehicles.

All orders are processed automatically, so please ensure the following:

Confirm that the item fits your vehicle by using eBay's fitment tool and thoroughly reviewing the description and notes on the page. If uncertain, reach out to us for assistance.
Verify that the item you're about to purchase will solve the problem with your car.
Verify that you've inputted the correct delivery address at checkout. Address change is not possible after the purchase.

Return Policy

Before returning items or considering leaving anything other than positive feedback, please reach out to us first.

For further return details, please refer to the "Shipping, Returns, and Payments" tab.

It's important to note the distinction between Genuine and OEM/OE Supplier brands. A Genuine part arrives in the original auto manufacturer's packaging with their logo displayed. OEM/OE Supplier parts are licensed by the vehicle manufacturer but do not have the manufacturer's logo.

These parts are often identical to those found at the dealership but may come in a different package. We do not accept returns based solely on these packaging differences.

Additionally, due to globalization, we do not accept returns solely based on the manufacturing location of a part, as brands are often produced in multiple countries.

Electrical Parts Policy

There are NO RETURNS on Electrical parts, components or parts that require CODING/PROGRAMMING unless the part is returned in its original unopened (sealed) box/package.

Warranty

We provide a 30-day warranty on all parts that we sell. If a part malfunctions during this period, please get in touch with us. Normal wear and tear or incorrect installation are not covered under warranty.

To validate the warranty, please ensure the following:

Provide photos of the defect (if possible) along with an explanation of its nature.
Include the Vehicle Identification Number (VIN).
Submit a certified mechanic's report.
This report should contain the installation details, including the date, mileage at the time of installation, and the current mileage of the vehicle.
The report is a concise assessment by a certified mechanic explaining why the purchased part failed and needs to be replaced.

The defective part must be returned in its original manufacturer’s packaging.

Payments Terms

In the rare event of an item being out of stock, you will be promptly notified and refunded. We offer combined shipping for identical items. If you plan to purchase multiple items, please contact us for assistance.