|
|
|
|
|
|
|
|
|
|
Fitment : (Please look the compatibility list's note to know more details )
2002 Chevrolet Blazer 4.3L
2002 Chevrolet S10 4.3L
Features & Benefits:
?
Symptoms of a bad osygen sensor:
A decrease in fuel economy
Engine Hesitation or misfire
Rough Idling
look the oxygen sensor's leader
?
Installation steps:
Step1.Park your Vehicle, set the parking brakes and open the hood
Step2.Disconnect the negative battery terminal. Remove the plastic cover. Loosen the 10mm nut. Remove the negative clamp from the battery.
Step3.Locate the oxygen sensor on your Vehicle. Do not touch the sensor or the heat shield until the engine cools down.
Step4.Press the connector and pull it away to unplug the oxygen sensor. Use a flat head screwdriver to press the locking tab on the connector before you pull it.
Step5.Place the oxygen sensor socket on the sensor and break it loose. If the sensor cannot be loosened spray penetrating oil and let it sit for at least 10 minutes. This will make it easier to remove the old Vehicle oxygen sensor.
Step6.Install the new oxygen sensor. Tighten the new Vehicle oxygen sensor to the recommended torque. If you are not sure what the correct torque call your Chevy dealer.
Step7.Connect the oxygen sensor wire harness by plugging it in.
How does the oxygen sensor in a car work?
The goal of the sensor is to help the engine run as efficiently as possible and also to produce as few emissions as possible.
The oxygen sensor is positioned in the exhaust pipe and can detect rich and lean mixtures. The mechanism in most sensors involves a chemical reaction that generates a voltage. The engine's computer looks at the voltage to determine if the mixture is rich or lean, and adjusts the amount of fuel entering the engine accordingly.
The reason why the engine needs the oxygen sensor is because the amount of oxygen that the engine can pull in depends on all sorts of things, such as the altitude, the temperature of the air, the temperature of the engine, the barometric pressure, the load on the engine, etc.
When the oxygen sensor fails, the computer can no longer sense the air/fuel ratio, so it ends up guessing. Your car performs poorly and uses more fuel than it needs to.
NOTES: If you have any question, please contact us.
Item Specifics | |
---|---|
Manufacturer Part Number | R99224ED184HARE |
Manufacturer Warranty | 1 Year |
Brand | REDHARE |
Fitment Type | Direct Replacement |
Interchange Part Number | 1A12567127 |
Other Part Number | 3ASG1856 |
Type | Oxygen Sensor |
Number of Pieces | 3 |
Custom Bundle | Yes |
Modified Item | No |
Position | Upstream, Downstream |
Thread Size | M18*1.5 |
Universal Or Specific Fit | Specific |
Attachment Method | Screw-On |
Terminal Type | Blade |
Automotive Color / Finish | Steel |
Housing Material | Metal |
Type | Sensor |
Features | Direct Fit |
Shop Category Delivery Help & Info Payment Policy Shipping Policy Return Policy FAQ About Us |
O2 Oxygen Sensor for Chevrolet Blazer S10 4.3L V6 2002 Upstream Downstream 3pcs
Fitment : (Please look the compatibility list's note to know more details )
2002 Chevrolet Blazer 4.3L
Features & Benefits:
?
Symptoms of a bad osygen sensor:
?
Installation steps: Step1.Park your Vehicle, set the parking brakes and open the hood
Step2.Disconnect the negative battery terminal. Remove the plastic cover. Loosen the 10mm nut. Remove the negative clamp from the battery.
Step3.Locate the oxygen sensor on your Vehicle. Do not touch the sensor or the heat shield until the engine cools down.
Step4.Press the connector and pull it away to unplug the oxygen sensor. Use a flat head screwdriver to press the locking tab on the connector before you pull it.
Step5.Place the oxygen sensor socket on the sensor and break it loose. If the sensor cannot be loosened spray penetrating oil and let it sit for at least 10 minutes. This will make it easier to remove the old Vehicle oxygen sensor.
Step6.Install the new oxygen sensor. Tighten the new Vehicle oxygen sensor to the recommended torque. If you are not sure what the correct torque call your Chevy dealer.
Step7.Connect the oxygen sensor wire harness by plugging it in.
How does the oxygen sensor in a car work?
NOTES: If you have any question, please contact us.
Payment
PayPal preferred.
Payments are expected within 7 days after the last winning auction is closed; Otherwise Unpaid Item Dispute will be filed with eBay. Shipping
We are not responsible for any wrong or undeliverable addresses. Please verify and update your shipping address on eBay during checkout.
All domestic orders will be shipped via USPS, UPS or FedEx from our US warehouse and usually arrives to your door in about 3-5 business days.
We ship the package to your shipping address in eBay instead of the one in PayPal. Please tell us your shipping address if it is different from the one in eBay.
The tracking number will be given for the customer to check the shipping status online (registered or faster service only).
Returns
We stand behind every product we sell.
All of our brand new items come with a 30-Days money-back guarantee.
We define the item as defective only if it doesn't function as described.
It is the buyer's responsibility to understand the item description before bidding.
Man-made damage by abuse or wrong operation is not covered by this warranty.
No product liability insurance is assumed.
Return shipping is to be paid by the Buyer.
Contact Us
If you are satisfed with the product you recieved, please have a good share.
We are always been trying to provide best service and reliable products for every customer.
All rights reserved. |