Feature
- Fit for VW Cayenne Tiguan Touareg Santana Passat /Golf V Variant SKODA FABIA
- When used for rear view at reversing,while the reverse fear shift is power on,camera with monitor image function is working and this kind of image function also could be used for front view and side view.
- Note:The camera swith is controlled by the reverse gear shift.
- Our camera are applicable to all type vehicles.They should be installed at proper position of the vehiche and used with monitor/GPS/parking sensor etc.
- Package include: 1xRear view camera 1xPower cable 1.3m 1xVideo cable 5.5m
Product description
Specification:
-TV system:PAL/NTSC optional
- Effective Pixels: PAL:628*586 pixels NTSC 510*496 pixels
- Horizontal Resolutions: 480 TV lines
- Video Output: RCA Connector, 1.0V P-P, 75 ohm
- Power Consumption: 110mA,max 300mA with IR on
- Power Supply: DC12V/24V
- Operating Temperature: -20 - 90 (Celsius Degree) RH95%MAX
- Storage Temperature:-30-80(Celsius Degree) RH95%MAX
-Lens angle:135/170 degree
-Waterproof:IP67/IP68
Technique Parameter |
Image sensors: | Color CMOS |
TV System: | NTSC |
Lens Angle: | 160 degree |
Video Color: | Colorful |
Effective Pixels : | 704×576 Pixels |
Resolution : | 420 TV Lines |
Minimum illumination: | 01IUX |
IP Rating: | IP68 |
How to Install
Installation location:
Car license plate light hole, replace your car original number plate lamp with new LED lamp
1. Take out your stock license plate light at the back of your car
2. Fix the camera to where the stock license plate light was
3. Connect the built-in license plate light of the camera to where the stock license plate light was connected to get the power
4. Connect the power of the camera to your reverse lights - red wire to positive and black wire to negative
5. Connect the video cable of the camera to the extension cord
6. Connect the extension cord to your car monitor
You will see the images when your car is in reverse shift.
Package include
1xRear view camera
1xPower cable 1.3m
1xVideo cable 5.5m