HUGE DISCOUNTS
FAST SHIPPING
FROM THE MANUFACTURE
In Wall Speaker Volume Control 300W with A/B Switch, Rotary Knob
White SVC405
OSD Audio SVC405 is a 300-Watt impedance-matching volume control with two-source (A/B) switching that allows you to adjust the volume of a pair of speakers independently of other speakers and control the volume of two pairs of speakers and one audio source. Ideal for both home and commercial installations, this decorative in-wall volume control includes an impedance-matching feature that stabilizes the ohm load so parallel connections of multiple volume controls can be installed without damaging the amplifier. The SVC405 maintains the full hi-fi audio frequency response with no low frequency roll-off and is rated at 300 Watts per channel (100W RMS). The rotary knob adjusts the volume from inaudible to loud, and when you order the SVC405, you get the complete kit that includes the junction box, screws white trim plate.
Features:
- Decorative, decora style impedance-matching volume control for whole house audio systems and dedicated audio zones
- Rated at 300 Watts (100 RMS) per channel with minimal bass roll-off
- Includes 2-source (A/B) switching for two pairs of speakers and one source
- Impedance-matching feature stabilizes the ohm load so parallel connections of multiple volume controls can be installed without damaging the amplifier
- Accepts up to 14-gauge wiring and fits in a standard gang box with a depth of 2.9'' Includes junction box and screws as well as a white plate to match any room d'cor
- Precision electronics provide low distortion and a ruler flat frequency response
- Rotary-style knob for a wide range of listening volumes
- Installs easily and works with almost any audio system
Specifications:
- Volume Control Type: 300W Impedance Matching Knob Style w/ A/B Switching
- Power Handling: 300W Peak; 100W RMS Per Channel
- Frequency Response: 20Hz - 20kHz
- Total Attenuation: 42 dB (Max)
- Steps: 12 (Make Before Break)
- Impedance Matching for 1/2, 4, 6, or 8 Pairs of Speakers
- *Can be Used as Non-Impedance Matching if Leaving Default on Jumper Setting at 2X
- Front-Mounted Switch Allows for Easy Adjustment When Multiple Speakers are Connected to a Single Receiver or Amplifier
- Impedance Matching Volume Controller with On/Off Switch
- Wiring Requirement: Up to 14 Gauge Wire
- Removable Input and Output "Quick Connect" Phoenix Connectors
- Fits in a Standard Single Gang Box - See LV1 for Mounting Bracket
- Unit Dimensions: (L x H x D) 1.62" x 2.5" x 2.5"
- What's Included: White, Ivory and Almond Plates, Inserts, Screws, and Knob
Payment
Shipping
Returns
We accept payment by any of the following methods:
PayPal, G Pay, Credit Card.
Please pay as soon as possible after winning an auction, as that will allow us to ship your item to you sooner! Most orders placed before 2PM ships same day (M-F).
We offer FREE shipping on most orders!
Your order will be shipped within 1 business day of receiving payment (Monday-Friday).
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
OSD Audio SVC405 is a 300-Watt impedance-matching volume control with two-source (A/B) switching that allows you to adjust the volume of a pair of speakers independently of other speakers and control the volume of two pairs of speakers and one audio source. Ideal for both home and commercial installations, this decorative in-wall volume control includes an impedance-matching feature that stabilizes the ohm load so parallel connections of multiple volume controls can be installed without damaging the amplifier. The SVC405 maintains the full hi-fi audio frequency response with no low frequency roll-off and is rated at 300 Watts per channel (100W RMS). The rotary knob adjusts the volume from inaudible to loud, and when you order the SVC405, you get the complete kit that includes the junction box, screws white trim plate. Features: ---Decorative, decora style impedance-matching volume control for whole house audio systems and dedicated audio zones ---Rated at 300 Watts (100 RMS) per channel with minimal bass roll-off ---Includes 2-source (A/B) switching for two pairs of speakers and one source ---Impedance-matching feature stabilizes the ohm load so parallel connections of multiple volume controls can be installed without damaging the amplifier ---Accepts up to 14-gauge wiring and fits in a standard gang box with a depth of 2.9'' Includes junction box and screws as well as a white plate to match any room d'cor ---Precision electronics provide low distortion and a ruler flat frequency response ---Rotary-style knob for a wide range of listening volumes ---Installs easily and works with almost any audio system Specifications: ---Volume Control Type: 300W Impedance Matching Knob Style w/ A/B Switching ---Power Handling: 300W Peak; 100W RMS Per Channel ---Frequency Response: 20Hz - 20kHz ---Total Attenuation: 42 dB (Max) ---Steps: 12 (Make Before Break) ---Impedance Matching for 1/2, 4, 6, or 8 Pairs of Speakers ---*Can be Used as Non-Impedance Matching if Leaving Default on Jumper Setting at 2X ---Front-Mounted Switch Allows for Easy Adjustment When Multiple Speakers are Connected to a Single Receiver or Amplifier ---Impedance Matching Volume Controller with On/Off Switch ---Wiring Requirement: Up to 14 Gauge Wire ---Removable Input and Output "Quick Connect" Phoenix Connectors ---Fits in a Standard Single Gang Box - See LV1 for Mounting Bracket ---Unit Dimensions: (L x H x D) 1.62" x 2.5" x 2.5" ---What's Included: White, Ivory and Almond Plates, Inserts, Screws, and Knob
FROM THE MANUFACTURE
HUGE DISCOUNTS
FAST SHIPPING
In Wall Speaker Volume Control 300W with A/B Switch, Rotary Knob
White SVC405
OSD Audio SVC405 is a 300-Watt impedance-matching volume control with two-source (A/B) switching that allows you to adjust the volume of a pair of speakers independently of other speakers and control the volume of two pairs of speakers and one audio source. Ideal for both home and commercial installations, this decorative in-wall volume control includes an impedance-matching feature that stabilizes the ohm load so parallel connections of multiple volume controls can be installed without damaging the amplifier. The SVC405 maintains the full hi-fi audio frequency response with no low frequency roll-off and is rated at 300 Watts per channel (100W RMS). The rotary knob adjusts the volume from inaudible to loud, and when you order the SVC405, you get the complete kit that includes the junction box, screws white trim plate.
Features:
- Decorative, decora style impedance-matching volume control for whole house audio systems and dedicated audio zones
- Rated at 300 Watts (100 RMS) per channel with minimal bass roll-off
- Includes 2-source (A/B) switching for two pairs of speakers and one source
- Impedance-matching feature stabilizes the ohm load so parallel connections of multiple volume controls can be installed without damaging the amplifier
- Accepts up to 14-gauge wiring and fits in a standard gang box with a depth of 2.9'' Includes junction box and screws as well as a white plate to match any room d'cor
- Precision electronics provide low distortion and a ruler flat frequency response
- Rotary-style knob for a wide range of listening volumes
- Installs easily and works with almost any audio system
Specifications:
- Volume Control Type: 300W Impedance Matching Knob Style w/ A/B Switching
- Power Handling: 300W Peak; 100W RMS Per Channel
- Frequency Response: 20Hz - 20kHz
- Total Attenuation: 42 dB (Max)
- Steps: 12 (Make Before Break)
- Impedance Matching for 1/2, 4, 6, or 8 Pairs of Speakers
- *Can be Used as Non-Impedance Matching if Leaving Default on Jumper Setting at 2X
- Front-Mounted Switch Allows for Easy Adjustment When Multiple Speakers are Connected to a Single Receiver or Amplifier
- Impedance Matching Volume Controller with On/Off Switch
- Wiring Requirement: Up to 14 Gauge Wire
- Removable Input and Output "Quick Connect" Phoenix Connectors
- Fits in a Standard Single Gang Box - See LV1 for Mounting Bracket
- Unit Dimensions: (L x H x D) 1.62" x 2.5" x 2.5"
- What's Included: White, Ivory and Almond Plates, Inserts, Screws, and Knob
We accept payment by any of the following methods:
PayPal, G Pay, Credit Card.
Please pay as soon as possible after winning an auction, as that will allow us to ship your item to you sooner! Most orders placed before 2PM ships same day (M-F).
We offer FREE shipping on most orders!
Your order will be shipped within 1 business day of receiving payment (Monday-Friday).
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.