Take your original Game Boy Color restoration to the next level with the custom built, ultra-efficient and clean power regulator designed in-house by RetroSix.
- The CleanPower replaces the original power regulator PCB of the Game Boy Color with a modern smooth and healthy power supply. This provides a clean, stable and efficient 5V line to the system to keep the lifespan of your console at it's best.
- To install, see images. Simply de-solder the old power regulator and solder the CleanPower in the same place as the original regulator.
- The input range of the CleanPower on VIN is 2.5V to 12V. This gives modders a much wider range if they want to install 2S lipo kits!
NOTES:
- The CleanPower only supports most modern screens and does not provide the voltages for the original screens. If you want to use the original screen simply leave the original regulator in place. You will need to cut the top right pin on the original regulator (Pin 7 when looking at the console from the button side. See photos for details), however this will vary by user. Then the old regulator will supply the LCD voltages, and the CleanPower will supply the bulk system power for the IPS / amp mods.
- Created by RetroSix.