Bambu Lab X1 Series 3D Printer Specifications

  • Build volume: 256x256x256mm
  • 0.4mm hardened steel nozzle
  • All-metal hot end (max temperature 300℃)
  • Max build plate temperature 110℃@220V
  • Fillament diameter 1.75mm
  • Build plate surface: Bambu textured PEI plate or Bambu Cool Plate (both compatible with Micro lidar)
  • Supports prints using PLA, PETG, TPU, ABS, ASA, PVA, PET, PA, PC, Carbon/Glass fiber reinforced Polymer
  • 20 m/s² acceleration
  • Max speed of tool head 500mm/s
  • Micro lidar assisted bed leveling
  • Active vibration compensation for better print quality
  • Spaghetti failure detection and auto-pause
  • Print resume after power outage
  • Ultra lightweight Carbon rail
  • 40W ceramic heater
  • 12W Cooling fan
  • Welded Steel XY Chassis
  • Printer physical dimensions: 389 × 389 × 457 mm, Net weight 14.13 kg, Gross weight 18 kg
  • Electrical requirements: 100-240 VAC, 50/60Hz, 1000W@220V
Bambu Lab X1-Carbon, equipped with extra cooling and a hardened nozzle and drive gear, unlocks a wider selection of materials, including PA, PC, PET, and TPU, and specializes in carbon fiber and glass fiber reinforced polymers.

The active vibration compensation (XY) algorithm and extrusion compensation guarantees extra smoothness and gets you good prints.

Printer uses AI for dual auto bed levelling, first layer inspection and spaghettin detection. 

You can control your prints remotely using Bambu Studion app on computer or Bambu Handy app on the phone. 

Built-in camera records timelapse videos.

Great starter pack for 3D enthusiast which will allow you to print within minutes after unpacking.
No assembly or DIY required.
It was used for 206 hours only.
Prints Benchy in 17min.
Can print print multiple colours if AMS system is attached (not included).

Together with 3D printer you will receive:
E-sun E-box Lite fillament drybox (worth £30)
3D Pen TG-17 with multiple colour filament strips (used twice). (worth £15)
Cleaning tools
3D printer spare parts
3D fillament

Spare parts
Silicone socks for hotend 3pcs (worth £10)
PTFE Tube 3pcs (worth £4)
Bambu Activated Carbon Air filter 2pcs (worth £14)
Replacement fillament cutter 3pcs (worth £4)
Chamber Temperature Regulator Fan (worth £15)
Cooling Fan for Hotend (worth £10)
Termistor for Hotend (worth £15)
Ceramic heater for Hotend (worth £15)
Nozzle Wiper 2pcs (worth £5)
Hotend with Hardened Steel Nozzle 0.4mm (worth £15)

1.75mm Fillament included:
New Bio-based PLA "Add North Textura flare  Velvet red 0.75kg (worth £30)
New eSun PETG orange 1kg (worth £20)
New PLA+ red 1kg (worth £12)
New TPU green 0.25kg (worth £10)
Used PLA Eryone Matte Black approx. 0.8kg left (worth £20)
Used Silk PLA Eryone Pink approx. 0.4kg left (worth £10)
Used PLA Unbranded Gloss Black approx. 0.8kg left (worth £6)
Used PLA Unbranded Yellow approx. 0.6kg left (worth £6)
Used PLA Priline Red approx. 0.7kg left (worth £6)
Used TPU red approx 0.15kg (worth £5)
Used HTVRONT Silk PLA White approx. 0.6kg left (worth £6)
New eSun Cleaning Fllament for 3D printers 0.1kg.


Free delivery.