JBL JRX225 Dual 15" Two-way Passive Loudspeaker with 2000W Peak Power

item# 1366044064188

New

The JRX225 is a portable, dual 15", two-way speaker system designed specifically for applications in live music performance and music playback. It features JBL low-frequency drivers with a 2.5" diameter edgewound ribbon voice coil, which provides more cross-sectional wire area in the voice coil gap than round wire designs for greater efficiency and power handling. For its high-frequency output, the JRX225 uses the JBL 2414H-C 1" polymer diaphragm compression driver for excellent high-frequency performance as well as system reliability.

An advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region, and a "Quasi 3-way" design offers the extra bass for which a dual fifteen system is designed, but without sacrificing performance in the critical mid-range. The upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only. The reduction in mid-range phase cancellation greatly improves midrange sound quality and coverage. It additionally has high-voltage capacitors and inductors with massive cores and heavy gauge wire that enables the crossover network to handle high power without saturating.

A Progressive Transition high-frequency waveguide provides superior coverage control, reduced distortion and smoother frequency response. The rugged, acoustically superior enclosure is constructed from .75" MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance. SonicGuard protects the high-frequency driver from excess power without interrupting the performance.

Speaker configuration
Active/passive: Passive
Type: 2-Way full range
LF driver: 2 x 15"
MF driver: Not applicable
HF driver: 1"
Power amp (active)
Amplifier type: Not applicable
Wattage: Not applicable
Mixer/preamp: Not applicable
Power capacity (passive)
8 ohms program/peak: N/A
4 ohms program/peak: 500W/2000W
Included power amp: No
Audio
Frequency response: 45Hz–12kHz
Coverage pattern: 90º x 50º
Max SPL: 133dB
Enclosure
Construction: .75" MDF
Width: 18.25"
Height: 43.25"
Depth: 17"
Weight: 94 lb.
Inputs
XLR: 2
TRS: 2
TS: Not applicable
RCA: Not applicable
SPEAKON: Not applicable
Output/thru
XLR: 1
TRS: Not applicable
RCA: Not applicable
SPEAKON: Not applicable

Power Rating: 500W/2,000W
Frequency Range (-10 dB): 36Hz–16kHz
Frequency Response (±3dB): 45Hz–12kHz
Sensitivity (@1m): 100dB SPL (1w/1m)
Nominal Impedance: 4 ohms
Recommended Amplifier Power: 500W to 1,000W into 4 ohms
Maximum SPL: 133dB
Nominal Dispersion: 90º x 50º
Crossover Frequency: 2kHz
Dimensions
(HxWxD): 1,099 mm x 464 mm x 432 mm 
(43.25" x 18.25" x 17")
Weight: 42.6 kg (94 lb.)
High Frequency Driver: JBL 2414H-C 25 mm (1") polymer diaphragm compression driver mounted on Progressive Transition Waveguide
Low Frequency Driver: JBL M128 x 2
Input Connectors: Neutrik Speakon NL-4 (x1); .25 in TS phone jack (x1); parallel