Power supply
AA battery eliminator / buck converter for Sennheiser G2, G3, G4, EK100, EK300, EK2000
(Sennheiser DC2 replacement part)
(Hirose 4 pin )
This product is particularly interesting for location sound mixers or audio engineers who use Sennheiser radio links (e.g. EK100, EK, 300, G2, G3, G4, EW 100 series), who normally need two AA batteries and have no external DC input.
Simply plug the battery adapter kit into the battery compartment of each receiver / transmitter and connect the Hirose 4 pin (HR10A-7P-4P) to your 12-18V power bank (V-Mount, NP1 etc..)
The converter is small, simple, light and the cable even fits under the closed lid!
TECHNICAL SPECIFICATIONS:
Battery eliminator for 2AA (3 volts) above devices
Input: 12-14v DC Length of the input cable: 400 mm
Output: 1 x 3.0 VDC regulated
AA battery eliminator / buck converter for Sennheiser G2, G3, G4, EK100, EK300, EK2000
(Sennheiser DC2 replacement part)
(Hirose 4 pin )
This product is particularly interesting for location sound mixers or audio engineers who use Sennheiser radio links (e.g. EK100, EK, 300, G2, G3, G4, EW 100 series), who normally need two AA batteries and have no external DC input.
Simply plug the battery adapter kit into the battery compartment of each receiver / transmitter and connect the Hirose 4 pin (HR10A-7P-4P) to your 12-18V power bank (V-Mount, NP1 etc..)
The converter is small, simple, light and the cable even fits under the closed lid!
TECHNICAL SPECIFICATIONS:
Battery eliminator for 2AA (3 volts) above devices
Input: 12-14v DC Length of the input cable: 400 mm
Output: 1 x 3.0 VDC regulated
(the offer refers to the Power-adapter only the receiver displayed in the picture is not part of deal)
Batterie Adapter für Sennheiser EK100,EK300, G2, G3, G4, (Sennheiser DC2 replacement part)
(Hirose 4 pin (HR10A-7P-4P)
Dieses Produkt ist besonders interessant für Location Sound Mixer oder Audio Engineers, die Sennheiser Funkstrecken verwenden (z. B. EK100, EK300, G2, G3, G4-Serie), die normalerweise zwei AA-Batterien benötigen und keinen externen Gleichstromeingang haben.
Stecken Sie einfach das Batterieadapter-Kit in das Batteriefach jedes Empfängers/Senders und schließen Sie den Hirose 4 pin (HR10A-7P-4P) an Ihre 12-18V Akku an (V-Mount, NP1 etc.)
Der Konverter ist klein, einfach, leicht und das Kabel passt sogar unter den geschlossenen Deckel!
TECHNISCHE DATEN:
Batterie-adapter für 2AA (3 Volt) o.g Geräte
Eingang: 12-18V-DC Länge des Eingangskabels: 400 mm
Ausgang: 1 x 3.0 VDC geregelt
TECHNISCHE DATEN:
Batterie-adapter für 2AA (3 Volt) o.g Geräte
Eingang: 12-18V-DC Länge des Eingangskabels: 400 mm
Ausgang: 1 x 3.0 VDC geregelt
(das Angebot bezieht sich nur auf den Power Adapter der abgebildete Receiver ist nicht Teil des Angebots)