This listing is for 4 of the convertible top pump mounting feet & the rubber reservoir fill plug, they will work on most american cars that have 4 pointed rubber mounting feet (this set is not for the cars that have spool grommets). The rubber fill plug will only work on cars that have a rubber fill plug, they will not fit cars with a screw in filler plug or cars that have a plastic reservoir. The rubber grommets are made just like the original and will fit perfectly. If your car has 3 mounting feet we also have a listing that has 3 of the grommets as well, we also have listing that have the fill plug also.

Installation instructions

The mounting feet can be a bit of a pain to install, here is the best way we have found to install them. First spray the pointed end with some silicone spray, dish soap or a small amount of oil. On the top side of the grommet there is a hole that goes part of the way through, use a small rod (like a phillips screwdriver but not sharp on the end!) and insert it into the hole. Place the grommet over the hole on the pump mount and push the rod down, this will stretch out the rubber and it will pop into place, you can use the same process to mount the pump into the car when you have all of the mounting feet installed. You want a rod slightly smaller than the hole so the rubber can stretch, don't use anything sharp and don't push too hard as you can rip the rubber

 If you have any questions feel free to contact us by clicking on the 'Ask A Question' link in this listing  and we will do our best to help you out. We have convertible top bleeding instructions, scissor top troubleshooting information and much more we can send by mail, email or fax.

Convertible Top Specialists has been in business for over 31 years selling the best in convertible related parts and weatherstripping for most cars trucks and vans.