Used Hoyt Invicta 37. Bow is 60#, 28in and has the SVX Cam system. Customer trade-in bow. Sharpie marks on cams for timing and has a small chip on the upper limb that has been smoothed out and patched and has not affected the shootability of the bow (see pictures). #3 Cam, only includes 28in module.
DESCRIPTION
- The next generation of podium topping hardware from Hoyt Archery has arrived. The Invicta riser is the longest, most stable target platform Hoyt has ever built. With a whopping 2-1/2" increase in riser length, this new design lowers the center of mass and produces a greater moment of inertia. When paired with a new flatter grip angle for more optimized grip pressure the Invicta will aim faster and hold better than any previous Hoyt bow built.
- Zero-Tolerance Pockets house the all new high performance Parallel Target Limb System a more efficient, faster limb design
- Combined with the new riser this bow produces 50% less noise and vibration than previous Hoyt target bows for a most comfortable shooting experience
- SVX Cam & 1/2 generates maximum speed with a performance draw cycle, shorter valley as compared to the DCX Cam to keep archers engaged and balanced at full draw with an ultra firm back wall
- Speed gains of over previous SVX cam bows with adjustable draw stop option for a firm or soft back wall setting
- Axle to Axle: 37 1/4"
- Brace height: 7"
- Mass weight: 4.7 lbs
#3 cam (27.5" - 28.5")
- Speed: 330 Fps
- Let-off: 65%
- Draw weight: 50-60#