Lid/Dustcover Kit for many models
of Pioneer Turntable inc PL514
Please read what is written below
carefully before you buy
Good quality turntables from the
70's and 80's are now worth serious money and being enjoyed again by owners who
were wise enough not to throw them out when CD arrived.
Nothing tops off a turntable like
a new clear dustcover; but for those whose cover has become lost or damaged, the
originals are simply no longer available (frankly, most manufacturers
were not really interested in supporting their products beyond the time
that they were in the shops). So, if you think you'll pick up a brand new
identical cover which will simply 'drop on' - think again. But for those
who are willing to get out a decent tape measure and fix new hinge mounts to
the rear - help is at hand..
This is a clear acrylic lid plus
hinge kit for Turntables. It was originally made to fit a well-known
Japanese branded turntable but since many/most turntable plinths have similar
dimensions, this has been found to be ideal for replacing lost/broken covers or
as part of a record player build/restoration. The brand is printed onto
the small centre label (see picture) and if you can't live with this, it can be
removed or covered with a bit of care.
This has been very popular with
Pioneer owners as it seems to fit most of the plinths used on models such as
the PL514
The lid is a properly moulded
item (not of the cheaper 'blown' or fabricated from sheet variety)
Dimensions are:
443mm x 347mm x 69mm (measured
externally)
Please measure your plinth and check that these
dimensions will be satisfactory
All the PL514 plinths I've seen
are 440mm wide so this lid overhangs by 1.5mm at each side which buyers tell me
is not noticeable.
See the pictures I've included
which show it on a couple of beautifully restored PL514 models
If you have another model, please
let me know what it is and what the dimensions are (width and depth to the
nearest mm) and I'll do my best to help.
The general thickness of the
acrylic is just over 3mm. The lower edge (i.e. the edge which is in
contact with the record player) is 4mm all round
The lid comes complete with a
pair of hinges and a pair of hinge mounting bases. The hinges are
compatible with the lid - fitting into a formed 'pocket' on the rear face, and
the hinge bases can be screwed to the rear of the turntable plinth (we even
include the screws in the kit). This allows the lid to be opened with the
hinges supporting the lids weight; or removed completely simply by lifting off.
UK Shipping is very well packaged, boxed and sent by courier. Europe & the rest of world using the eBay
Global shipping program which has worked very well for this item.