Compatible with ：
2007- 2017 Front and Rear GMC Emblems
2008 - 2013: GMC Sierra 1500
2007 - 2013: GMC Yukon
All Years: GMC Terrain
All Years: GMC Acadia
This is to cover one full GMC emblem. You will need to order 2 for both emblems.
GMC emblem only need 3 packs, we send it in 4 packs so that you can practise and learn how to make it perfect.
Instructions:
TOOLS NEEDED:
Vinyl Sheet
Razor Blade
Credit Card or Squeegee
Hair Dryer or Heat Gun
STEPS:
1） Remove all dirt from the emblem using window cleaner. Finish cleaning with rubbing alcohol.
2） Remove the white paper backing from vinyl sheet, ensuring the sheet does not fold over on itself or become crinkled.
3） Carefully apply the vinyl sheet over the emblem, ensuring the vinyl covers the entire letter.
4）Using a squeegee or credit card, smooth the vinyl sheet on to the emblem. Work from the center of the emblem outwards smoothing out any bubbles or imperfections.
5. Use a hair dryer or heat gun to slightly heat up the vinyl sheet to help cover the curved surfaces of the emblem. You can use a credit card edge to help push the vinyl into the cavity around the main emblem.
6. Using the razor blade, carefully cut around the emblem to remove any excess vinyl.
7. If any air bubbles still exist, pop with a needle or allow to fade over time in the sun.
Tips:
1. Wait a week before driving through a car wash.
2. Cut carefully and slowly, making sure to stop when reaching the interior edge of the chrome emblem frame. This will ensure you do not scratch any part of your emblem.
3. The red letter portion of the emblem must be within 4" X6"
Package Icluded：
4 X Regular 4" X6" Vinyl Sheets.
2007- 2017 Front and Rear GMC Emblems
2008 - 2013: GMC Sierra 1500
2007 - 2013: GMC Yukon
All Years: GMC Terrain
All Years: GMC Acadia
This is to cover one full GMC emblem. You will need to order 2 for both emblems.
GMC emblem only need 3 packs, we send it in 4 packs so that you can practise and learn how to make it perfect.
Instructions:
TOOLS NEEDED:
Vinyl Sheet
Razor Blade
Credit Card or Squeegee
Hair Dryer or Heat Gun
STEPS:
1） Remove all dirt from the emblem using window cleaner. Finish cleaning with rubbing alcohol.
2） Remove the white paper backing from vinyl sheet, ensuring the sheet does not fold over on itself or become crinkled.
3） Carefully apply the vinyl sheet over the emblem, ensuring the vinyl covers the entire letter.
4）Using a squeegee or credit card, smooth the vinyl sheet on to the emblem. Work from the center of the emblem outwards smoothing out any bubbles or imperfections.
5. Use a hair dryer or heat gun to slightly heat up the vinyl sheet to help cover the curved surfaces of the emblem. You can use a credit card edge to help push the vinyl into the cavity around the main emblem.
6. Using the razor blade, carefully cut around the emblem to remove any excess vinyl.
7. If any air bubbles still exist, pop with a needle or allow to fade over time in the sun.
Tips:
1. Wait a week before driving through a car wash.
2. Cut carefully and slowly, making sure to stop when reaching the interior edge of the chrome emblem frame. This will ensure you do not scratch any part of your emblem.
3. The red letter portion of the emblem must be within 4" X6"
Package Icluded：
4 X Regular 4" X6" Vinyl Sheets.
