Description
6x10/100Mbps auto-sensing RJ45 ports, 4x10/100Mbps PoE ports, 2xUplink Ethernet port
Can supply power to network surveillance cameras that with PoE function
Supports port auto-flip (Auto MDI/ MDIX)
Adopts store-and-forward architecture
Features with fanless, natural cooling, small, compact and quiet design, suitable for desktop or wall
Standard: IEEE802.3af/at
Consumption: 90W
Power adapter voltage: Input AC 100V-240V
PoE switch input: DC 48V-55V
Network port: 1-4 port: 10/100Mbps PoE Ethernet Port; uplink port: 10/100Mbps Ethernet Port
Transmission Distance: 0-250m
Transmission media: Cat5/5e/6 standard network cable
PoE power consumption: af≤15.4W at≤30W
Working temperature: 0℃-55℃
Storage Temperature:-20℃-70℃
Relative humidity: 20%-95%
MTBF: >30000h
Item size: 20.2 * 14 * 4.5cm / 7.96 * 5.52 * 1.77in
Item weight: 764g / 26.97oz
Package weight: 988g / 2.18Lb
Package size: 27.2 * 17 * 6cm / 10.72 * 6.7 * 2.36in
Item Included:
PoE switch x1
AC Power Cable x1
Supporting 802.3 Ethernet, 802.u Faster Ethernet;
Supports POE IEEE 802.3af/at compliant Powered Device (PD)
Modes: Normal switch mode/Extended mode(Port1-8:250Metres ultra-long transmission)
Ports 1~8 features POE power supply capability and can be used as Power over Ethernet devices;
Auto MDI/MDIX crossover for all ports
Support full duplex based on IEEE802.3x and half duplex based on Backpressure
Support non-blocking wire speed forwarding
MAC address auto-learning & auto-aging
Just Plug and Play
Technical specification and parameter
Interface | 8*10/100M POE ports (Data /Power) 2*10/100M uplink RJ45 ports (Data) | |
Basic function | Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol Supports POE IEEE 802. 3af/at compliant Powered Device (PD) Store-and-forward switching scheme Support IEEE802.3X full duplex and Backpressure half duplex MAC address auto-learning & auto-aging | |
Standards | IEEE 802.3 10BASE-T Ethernet IEEE 802.3i 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3af/at, Power over Ethernet IEEE 802.3x Flow Control | |
Mode | Normal switch mode/Extend mode | |
Data Transfer Rate | Ethernet : 10Mbps(Half-duplex);20Mbps(Full-duplex) Fast Ethernet :100Mbps(Half-duplex);200Mbps(Full-duplex) | |
Performance | Store & Forwarding | Yes |
Switching Capacity | 2G | |
MAC Address Table Size | 2K | |
Jumbo Frame | 2048 byte | |
Environmental | Operation Temperature:0℃~40℃ Storage Temperature:-40℃~70℃ | |
Operation Humidity:10%~90% RH Non-condensing Storage Humidity:5%~90% RH Non-condensing | ||
Power Input POE Standards | Single port maximum power 30W, whole switch maximum power 120W Supporting Soft Start of High Power PD Support sequential boot-up Power Supply Pin:12+/36- | |
AC 110~240V 50/60HZ | ||
Cabling type | 100Base-TX: Cat 5e or better UTP/STP(≤100m) 10Base-TX: Cat 5e or better UTP/STP(≤250m) | |
Physical dimensions | 190mm*140mm*43mm(W x D x H) |