Van Damme Neutrik 1/4" 6.35mm jack plug instrument patch lead. More Van Damme Patch lengths available Click Here

Made to order by us - over 30 years of experience.

The Van Damme Pro Grade Classic XKE instrument cable used in this lead is Robust, Flexible, relatively low capacitance and has an ultra pure oxygen free copper make up. We use this cable on many of our unbalanced leads and has  got high regard from many of our customers for sound quality. It has tight construction and dual screens  of conductive thermoplastic and close lapped copper ensure lower noise handling and excellent noise rejection. The internal signal conductor also has silver plating to help with high frequencies - we have had quite a few good comments about sound quality over the years due to this. There aren't many cables that come up to the quality of this cable.

We use Neutrik connectors which are regarded by many as being one of the best connectors available. These are robust heavy duty jack plugs made to last. These jack plugs are CNC machined in one piece not riveted this avoids tip break off which is very common on cheap jack plugs.

Use the drop down menus to choose your Jack combination - What you see in the photo with regards to jack combination is what you will get. Choose cable colour

Cable Length Important Reference points

The cable is cut to length and the cable is then fitted to the connectors. Please note that 110mm of the cut cable will be inside the connector when made up. Please ensure you take this in to account when measuring up your leads. Other sellers may not tell you how they measure their leads but we think it is vital to be clear on this.

Neutrik 1/4" 6.35mm Jack Plugs Models Used:


Straight Jack NP2X Nickel Coloured shell

Right Angle Jack NP2RX Nickel Coloured outer shell

Straight Jack NP2X-B Gold pin contacts Black outer shell

Right Angled Jack NP2RX-B Gold pin contacts Black outer shell


Use of this lead:

These leads are designed for use between audio equipment at mic or line level. Typical applications are between:

Guitar effects foot pedals
Keyboard effects pedals
Mixers with unbalanced outputs can be used on the inputs as well - unbalanced
DJ Mixers with unbalanced outputs
Wireless Mic System output unbalanced - jack output
Amplifiers (Inputs) unbalanced
Audio Processors with unbalanced inputs or outputs
Active PA Speakers with unbalanced inputs

For mic/line level use only. 

All our leads are custom made to order so we can make them the precise length if you want - contact us through ebay messages.

Please read Terms and conditions of the sale - Buying this item(s) means you accept these terms