Blow Off Dump Valve for Mini Cooper S R56 R57 JCW N14 1.6 Turbo Engine FMDVMCS

Part NO.:

FMDVMCS

This Item Include

FMDVMCS Adaptor    x 1

Socket Cap Bolts      x 3

Fitment/Application:

For BMW Mini Cooper 2007-2012 (R56, R57)

For PEUGEOT 1.6 Turbo Engines 207 GT GTI 307 & 308

For Citroën C5 / DS3

Please Note:

There are no installation guides included (FMDVMCS INSTRUCTIONS), we highly recommend professional installation.

1.) First locate the original solenoid which can be found under the intake pipe.

2) Remove the intake pipe at both ends and remove to gain access to the solenoid.

3) You should now be able to see the original solenoid and the 3 bolts holding it in place.

4) We would recommend moving the radiator fluid tank to further gain access to the solenoid. It can be easily moved by undoing the one 8mm screw.

5) Next, remove the 3 bolts on the original solenoid using an Allen key (access is  restricted at this point and it is recommended to check access to all bolts before  proceeding)

6) Once the solenoid is removed carefully place it to one side or disconnect from the loom and remove from the vehicle. You can now offer up the blow-off adapter

* Do not insert bolts at this time.

7) When you have the blow-off adapter lined up correctly, fit the original solenoid back over with the wiring connection pointing down (if you have removed it).

Insert the new longer bolts supplied and tighten up until the original solenoid is firmly tight against the blow-off adapter. Re-attach the fluid tank and all hoses and rev away!

 

* Please note that the Oring that affects the seal should be held in place with a light smear of grease during assembly.

Failure to observe this instruction may result in operational failure or damage. If you are at all in doubt of your competency to install this product please enlist the help of a qualified technician.

General Policies:

KA parts is proud to offer you the best price and fastest service for aftermarket parts needs. If you have a question before buying. Please do not hesitate to contact us.

In order to keep our prices low, we have the following purchasing policies:

Shipping and Billing:

•We only accept payment from, and ship to, Confirmed PayPal addresses.

•We provide various shipping choices, please choose one to your need.

•Buyers have to pay the return shipping cost if a wrong part was bought. Item must be returned within 30 Days. 20% restocking fee will be charged if one would like to cancel the order before ship out; there will be no extra charge if switches to the equivalent item. 10% restocking fee is applied to all refunds.

Please notice the available service in your local city.

Buyer should be responsible for possible duties, taxes, and customs clearance fees as requested by country laws. We will not be responsible for any loss caused by custom delay or clearance due to buyer.

Returns:

•Please contact us first before returning your product.

•We only warranty cost of parts. Any installation or other fees are non-refundable.

•If a part arrives damaged, or is defective, it is our responsibility to take care of it but it must be reported to us immediately.

Payment:

eBay Immediate Payment via PayPal. Please purchase and pay for the item through the eBay auction, and do not manually send us a PayPal payment.

PushAuction