Right Angled to Right Angled Van Damme Ultra-Pure Oxygen Free Copper Silver Plated Cable, Neutrik Balanced 1/4 6.35mm TRS Jack Plugs. Neutrik NP3RX Right Angle Jack Plugs. This is for a single lead.

This lead is a balanced configuration made for balanced audio equipment.

We make this lead using 4 percent silver solder, better sound quality and better soldered joint that is harder than standard lead free solder and will last for years to come. We have been in the pro audio industry for over 30 years hands on experience.

Choose your Van Damme balanced cable Colour:

Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Grey, White.

Choose your Van Damme balanced cable Length:

0.1m 0.25 m, 0.5 m, 0.75 m, 1 m, 1.25 m, 1.5 m, 1.75 m, 2 m, 2.5 m, 3 m, 4 m, 5 m, 6 m, 7 m, 8 m, 9 m, 10 m, 15 m, 20 m, 25 m, 30m

If you need any specific length or need a little extra please ask - it can be made to that length as these are made to measure when we receive the order. Contact through ebay messages.

Connections are made between the connectors on: (these are standard connections)

Tip Jack (Hot) - Tip Jack (Hot)
Ring Jack (Cold) - Ring Jack (Cold)
Sleeve Jack (Screen) - Sleeve Jack (Screen)

Cable Length Important

PLEASE MEASURE UP CAREFULLY TO AVOID ERRORS

Leads 1m or less (patch leads) will be measured visible cable from the rear black boot of the connector. We add 100mm of cable to compensate for the connectors.

Leads over 1m will be measured cut length of cable. The connectors use up 100mm of cable.

Typical applications for this lead:

For mic/line level use only, on balanced audio equipment.

If you are looking for a lead for amplifier low impedance output to passive speaker, we will have this type of lead in our ebay store.

Note:

If you have a piece of audio equipment that is unbalanced then you need an unbalanced lead. Unbalanced leads are guitar, instrument, patch leads which we also sell. If you have one piece of audio equipment that is balanced and one unbalanced regardless if it is input or output then you will need to use an unbalanced lead.

Please ensure that both your input and output is balanced before buying this lead. Please consult your user manual for both of your input and output audio equipment if you are unsure.

Application:

Mixer to amplifier inputs
Patching mixers to outboard equipment
Mixer to audio interface
Link lead between power amplifiers and active speakers
Patching in racks between FX units, EQ media output devices.
Can be used for any mic/line level use
Mixer output to active speaker input (note an active speaker is a speaker with an amplifier built into it)

We have also supplied this lead to guitarist where there is a dual output on the guitar, dual pickups.

Van Damme Cable Specification:

A cable that is trustworthy reliable hard wearing. Van Damme Tour Grade Classic XKE Microphone cable combines flexibility, durability, noiseless operation and excellent handling characteristics. Van Damme cables can be found in film and recording studios, professional touring applications, professional DJ setups, education sectors, hire companies. It really is a great cable. There aren't many cable companies that do have their own website but Van Damme is one of the exceptions. Their website has many a famous artist on there and many stories where Van Damme cable has been used in touring and hire applications. Please see http://www.van-damme.com click on tour.

Mechanical specification cable

Conductor Material Bare silver plated ultra-pure oxygen free copper wire
Stranding 7 x 0.10mm
Material Bare ultra-pure oxygen free copper wire
Stranding 21 x 0.10mm
Insulation Material XLPE Cross linked polyethylene
Diameter 1.60mm ±0.10
Colour coding Red, Blue
Cabling Type Twisted pair with cotton yarn fillers & paper wrap
Lay length 25mm
Screen Type 80 x 0.10mm close lap spiral bare oxygen free copper wire
Jacket Material Flexible PVC/Neoprene composite
Average thickness 1.40mm
Overall diameter 6.35mm ±0.15
Physical properties unaged
Jacket (at 60ºC) Tensile strength >8N/mm2
Elongation >250%
Heat shock test 120 ºC x 1 hour - no cracks
Test voltage 1000 Vdc x 1 minute OK
Electrical characteristics
Resistance Conductor Ohm/Km <85
Screen Ohm/Km <85
Insulation M Ohm/Km >5000
Capacitance Core to core pF/m 56 nominal

Neutrik Connectors NP3RX Right Angle NP3RX Straight. Nickel.

Neutrik 3 pole TRS stereo inline Jack plug 1/4" 6.35mm cable connector with metal (nickel colour) housing, silver contacts with solder connections. The connector has a chuck type cord grip for superior cord grip over many other connectors. Genuine true quality and built to last.

All metal housing eliminates the plastic cover of other jacks and improves further durability and EMI protection
1/4" 6.35mm Stereo 3 pole Jack Extra slim plug for highest packing density
Robust die cast shell in stylish design
Improved chuck type strain relief for reliable cable retention
Sleek design for best handling convenience

Precision machined one-piece contacts - avoid hook up of tip contact