2 x Adaptor looms, to convert
HALOGEN to LED rear lights
on
VW Golf Mk 7 2012-16
(When you are fitting Golf 7 LED lights, but not Mk7.5)
Not for Golf Estate
Not for Golf Estate
Included are terminated wires to plug into your inner light connectors.
These allow your new inner indicators to function.
Flip open the retaining clip and insert into the vacant middle position.
These allow your new inner indicators to function.
Flip open the retaining clip and insert into the vacant middle position.
PLEASE NOTE - LED lights are NOT INCLUDED
Functional Description
These adaptors are for fitting genuine Golf Mk7 LED rear lights to cars originally with halogen lights.
Suitability
Suitability
Your new inner lights should have 5-way connectors as per original halogen.
Your new outer lights should have 4-way connectors as per original halogen.
NOT suitable for fitting the Mk7.5 LED lights as these have no inner indicator.
Your new outer lights should have 4-way connectors as per original halogen.
NOT suitable for fitting the Mk7.5 LED lights as these have no inner indicator.
Fitting
The adaptors for the outer lights are plug and play
To fit the wire for the indicator to the inner lights,
lever open the latch on the plug and insert the terminated wire into the central position.
(contact us if you need further advice)
To fit the wire for the indicator to the inner lights,
lever open the latch on the plug and insert the terminated wire into the central position.
(contact us if you need further advice)
Included are 2 adaptor looms, one for each side.
To fit:
* Replace your original halogen light assemblies with LED.
* Fit the adaptors between the car harness and the outer rear light units.
* Remove tailgate trim to run the cable to the inner rear light.
* Fit the wire to the vacant middle pin of the plug of the inner light unit.
Lever open the latch on the plug and insert the terminated wire into the central position.
(contact us if you need further advice)
(contact us if you need further advice)