40% MARKDOWN ON SPRINGS FOR THE FAUCET STYLE KNOBS ON VINTAGE DELTA MACHINERY UNTIL OUR STOCK IS DEPLETED.

THESE STAINLESS STEEL COMPRESSION SPRINGS ARE NORMALLY PRICED AT $4.20 A PAIR.  THEY ARE MARKED DOWN TO $2.50 A PAIR UNTIL THEY ARE GONE.

NEW SPRINGS FOR USE WITH THE FAUCET STYLE HANDLES ON VINTAGE DELTA MACHINES

These springs are sold by the pair.

Delta used the small four spoke die cast handle on a number of vintage machines.

·       These handles hold the table in position on the popular 14” band saw.

·       These handles lock the work table at the trunnion clamps on the 12” disc sander.

·       These handles hold the top cover in place on a 6 x 48 belt sander.

·       And are probably used on a half dozen other vintage machines.  

For these faucet style knobs to best function, Delta installed a small coil spring over the threaded stud and into the bottom side’s counter bore in the handle. 

The Delta part number for that spring is NCS-33.  These original springs are often missing, corroded, or damaged when restoring a vintage Delta machine.

There was one spring originally used under each handle. 

This listing is for a pair of new exact replacement springs, of the same specifications as the OEM Delta spring but are made from type 302 stainless steel, so they will not corrode.  Nor do they need plating or painting. 

We sell these springs by the pair, because shipping is too high to make it worthwhile to sell them individually.  Shipping for as many pair of springs as you wish buy is $5.50, to anywhere in the lower 48 states.  The springs will be shipped in a trackable padded envelope via the US Post Office.