The power, clarity, and range everyone who likes it LOUD loves about the GEN-X series returns in a speaker equipped with an extremely durable steel basket to outlast any vehicle it’s installed in.

The G6.9Xi was made for amplifiers, but can be used in factory settings with 4-ohm factory amplifiers in most cases for great sound and clarity over factory OEM speakers.

The Mylar Balanced Dome Tweeters included in the G6.9Xi coaxial help it achieve the highest range of frequencies possible, while the speaker itself reaches frequencies as low as 35Hz. The 3-way design on these speakers bring a full range of frequencies with great response without the need for a large power requirement.

The G6.9Xi speakers get loud extremely easily with a MAX Power Handling of 180W and RMS Power Handling of 60W.

Highlights:
  • 3-Way Design implemented through use of two tweeters per speaker for full range quality on every listen
  • Rubber surrounds with treated paper cones for great volume and sensitivity to power ratio
General Specifications:
  • Nominal Diameter  6X9" / 152x228mm
  • Nominal Impedance  4 Ohms
  • RMS Power Handling  60W
  • MAX Power Handling  180W
  • Sensitivity (1w/1m)  86dB
  • Frequency Response 35Hz-20KHz
  • Recommended HI Pass Crossover 50Hz
Woofer Specifications:
  • Voice Coil Diameter 1" / 25.5mm
  • Voice Coil Former Material  ASV
  • Winding Material  EISV
  • Cone Material Paper
  • Surround Material Rubber
  • Basket Material  Steel
  • Basket Color/Finish Black Matte
  • Magnet Material Barium Ferrite
  • Magnet Weight 15.7Oz / 445g
Tweeter Specifications:
  • Nominal Diameter Tw1: 2.3" / 59mm - Tw2: 1.1" / 29mm
  • Voice Coil Diameter Tw1: 0.6" / 17mm - Tw2: Peizo
  • Voice Coil Former Material  Tw1: PESV
  • Winding Material  Tw1: EISVM
  • Diaphragm Material Tw1: Mylar - Tw2: Mylar
  • Magnet Material Tw1: Barium Ferrite
  • Magnet Weight Tw1: 34g
Speaker Measurements:
  • Overall Diameter 6.4"x9.2" / 163x234mm
  • Overall Depth  3.85" / 97.8mm
  • Overall Diameter (With Grill) 7.24"x10.4" / 184x264mm
  • Overall Depth (With Grill) 4.15" / 105.5mm
  • Front Mount Baffle Cutout 5.9x8.66" / 150x220mm
  • Mounting Depth 2.95" / 75mm
  • Motor Diameter 4.17" / 106mm
  • Tweeter Protrusion  0.9" / 22.8mm