LUMATEK LED ACCESSORIES CONTROL PANEL DAISY LINK REMOTE DRIVER / BALLAST CABLE
LUMATEK Digital Panel PLUS 2.0 (HID+LED)
The LUMATEK Digital Panel PLUS 2.0 (HID+LED) is a dual
signal digital lighting controller that offers precise external control of your
Lumatek lighting fixtures, drivers and ballasts. Using innovative technology,
this controller smartly monitors your grow room temperatures, light timing
& intensity automation, safety-controlled dimming and switching On/Off.
Simply connect it to your Lumatek Controllable Fixtures, Drivers or Ballasts
and easily regulate your grow room environment.
The Lumatek Digital Panel Plus 2.0 is a dual signal twin
channel digital lighting controller with each of the two channels (Zones)
capable of controlling up to 200 Lumatek controllable HID fixtures or ballasts
with a digital RS485 signal or up to 50 LED drivers with analog 0-10V signal.
It is possible to use each Zone to control fixtures in two independent separate
rooms or to control up to 400 fixtures in one room with two different light
source types.
Each Channel (Zone) can control same-powered
ballasts/drivers; Zone A can control the same-powered ballasts/drivers as Zone
B or Zone B can be set to control different powered ballasts/drivers eg: Zone A
can be set to control 600W LED fixtures and Zone B set to control 600W or 315W
HID ballasts.
Connectable with Lumatek Controllable HID ballasts &
fixtures; 315W, 600W, 630W & 1000W
Connectable with Lumatek Controllable LED drivers &
fixtures; 90W, 465W, 600W & 1000W.
Dual signal RS485 digital for HID and 0-10V analog protocol
for LED.
Automate switching, timing, dimming and simulate sunrise and
sunset periods.
Temperature-control dimming & switching for safety
control
Automate light intensity and PPFD
Control up to 400 HID ballasts or fixtures (200 ballasts per
channel – Zone A & B)
LUMATEK DAISY CHAIN 5M CONTROL CABLE
This 5m long Control Link Cable is designed to daisy-chain
your LUMATEK Controllable LED Fixtures allowing a stable and precise connection
without any interference. Simply connect the M12 Self-locking male plug into
the Signal Out LED structure output and the M12 Self-locking female plug into
the Signal In LED structure input of the next fixture.
LUMATEK LED Driver Remote Use 5m Extension Cables (x3) for
Zeus 1000W Xtreme
These three 5m long Extension Cables are designed to connect
the Lumatek driver and LED fixture, in case the driver is used remotely and
away of the fixture. Allowing a stable and precise connection without any
interference these product is composed by 3 elements:
2x 5m Extension Power Cable for LED driver
5m Extension Dimming Cable
LUMATEK 600w and 465w LED Driver Remote Use 5m Extension Cables (x2)
These two 5m long Extension Cables are designed to connect
the Lumatek driver and LED fixture, in case the driver is used remote and away
of the fixture. Allowing a stable and precise connection without any
interference these product is composed by 2 elements:
5m Extension Dimming Cable