Faithfull Cold Chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges.
For cutting brick, concrete and paving slabs. The cutting edge has an angle of approximately 60°.
Manufactured to BS 3066. pick your size required.
The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge.
NOT TO BE USED FOR CUTTING BRICKS
The Faithfull FAIEC214 Flooring chisel has the following dimensions:
Size: 230 x 57mm (9 x 2.1/4 inch). with or without safety grip
These Faithfull brick bolster chisels are suited to cutting bricks during building work.
This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars. in 3" or 4" with or without safety grip.
The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick.
The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris.
Size: 230 x 5mm (9 x 3/16in).
For detachable stone dressing combs which are used for preparation of surface prior to re-rendering.
Size: 200 x 25mm (8 x 1 in). comb or scutch not supplied