Description:

• Premium high quality ceramic internal tire balancing beads, durable, re-usable, environmentally friendly
• No more external weights
• Balance last the Life of the tire
• Increases tire life, improves fuel economy
  
• Reduced vibration and heat build up
• Safe for all tire pressure monitoring systems TPMS
• Can be used in tube type and tubeless tires
• Shipped FAST & FREE from a USA business

Kit Includes:

• 4 bags of 3 ounces - one for each tire
  
• 4 Premium Long Filtered Valve Cores - these are real filters!  
  
• 4 Red Valve Caps
• 1 Applicator Kit - with a high quality soft bottle!

Installation Instructions:

• Cut the Tyrebeads bottle spout tip above the mark
• For each tire:
• Remove the bottle cap and pour the contents of bead bag into the bottle. 
• Put the bottle cap back on the bottle and attach the clear tube to the bottle cap spout.
• Rotate the wheel so the valve stem is at the bottom, remove the valve core using the provided tool, allow the tire to deflate, check that the valve stem is not obstructed, then place one end of the clear tube over the valve stem.
• Invert the Tyrebeads bottle and squeeze repeatedly to get all the TyreBeads to flow down the clear tube into your tire.
• Once the beads are inside the tire, screw in the provided valve core into the valve stem, re-inflate the tire, and screw on the provided red cap.
• Note:  You can use vibration (by pressing an engraver or sander against the stem) or an air compressor to get the beads to go through the valve stem faster.