Elite Greenhouses original glazing seal, 50' rolls in black. Used by Elite in some coloured greenhouses.

If you are replacing the non setting butyl mastic seal that was used by Elite until around 15 years ago you may be better off using my self adhesive PVC seal, it is very difficult to remove all the mastic and putting in the new seal can be awkward. 

These are 50 feet rolls of neoprene glazing bead designed for Elite Greenhouses only, if you are looking for another make please look at our self adhesive PVC seal that we use when refurbishing greenhouses.

If you need another quantity we now list these in the following quantities: 1, 2, 3 or 4. It will save you a little to buy from the correct quantity listing.

We have included a rough sketch which is for information only. All sizes are as best as we can measure but please do not base your decision as to whether it will be suitable purely on this sketch. Please note that we no longer post samples out as on numerous occasions people have thought it would be OK after trying a short length in the glazing bars only to find that when using a full 4' length on the sides it will not hold in place. Elite have a unique profile inside their glazing bars which this seal clips securely into, we have not come across another manufacturer who uses the same profile.

Any questions please ask, however we cannot advise whether this will be suitable for your greenhouse if it is not an Elite model. We always use our self adhesive PVC seal as a matter of course when refurbishing any other greenhouses and we strongly recommend you do also.