Dual Diesel CAT Fuel Filter Remote Mount System without Lift Pump

Dual Diesel Fuel Filter Mount No drill frame mountAccepts any 1"-14 filtersFits frames up to 7.5" TallMounting plate can be bolted directly to frame if drilling is preferred Includes CAT 1R-0750 & 175-2949 Filters*Some assembly required.Short list of additional filters that can be used: 2 Micron CAT 1R-0749 2 Micron CAT 1R-075010 Micron CAT 175-2949 Water Separator3 Micron water separator Wix 33005 / Napa 3005 14 Micron water separator WIX 33405 / Napa 3405 2 Micron Wix 33528 / Napa 3528 6 Micron Wix 33352 / Napa 3352 3 Micron Donaldson P551311 5 Micron Baldwin BF7587

Dual Diesel Fuel Filter Mount

  • 3 Bolt Aluminum Mount
  • Accepts most 1"-14 filters
  • 1/2" Pipe to 1/2" Hose Barb Adapters
  • Both hose barbs can be placed on one end or set across from each other
  • Fuel flows parallel between filters, meaning it is best to use the same filter on each side.
  • Filter mount measures approximately: 8" x 5" x 2.25"
  • Great for equipment and transfer tank systems.

*Some assembly required.

Short list of additional filters that can be used:

  • 2 Micron CAT 1R-0750 (7.25" tall)
  • 2 Micron CAT 1R-0749 (10.5" tall)
  • 10 Micron CAT 175-2949 Water Separator (7.5" tall)
  • 3 Micron water separator Wix 33005 / Napa 3005
  • 14 Micron water separator WIX 33405 / Napa 3405
  • 2 Micron Wix 33528 / Napa 3528
  • 6 Micron Wix 33352 / Napa 3352
  • 3 Micron Donaldson P551311
  • 5 Micron Baldwin BF7587