Description:
- Premium ceramic internal tire balancing beads, durable, re-usable, environmentally friendly
- No more external weights
- Made from high quality ceramic beads
- Increases tire life, improves fuel economy
- Reduced vibration and heat build up
- Safe for all tire pressure monitoring systems TPMS
- Can be used in tube type and tubeless tires
Kit Includes:
- 1 Ounce for front tire
- 2 Ounces for rear tire
- Applicator Kit - high quality soft bottle
- Valve Cores
- Valve Red Caps
Installation Instructions:- Cut the Tyrebeads bottle spout tip above the mark
- For front tire:
- Remove the bottle cap and pour the contents of 1oz bead bag into the bottle.
- Put the bottle cap back on the bottle and attach the clear tube to the bottle cap spout.
- Rotate
the wheel so the valve stem is at the bottom, remove the valve core
using the provided tool, allow the tire to deflate, check that the valve
stem is not obstructed, then place one end of the clear tube over the
valve stem.
- Invert the Tyrebeads bottle and squeeze repeatedly to get all the TyreBeads to flow down the clear tube into your tire.
- Once
the beads are inside the tire, screw in the provided valve core into
the valve stem, re-inflate the tire, and screw on the provided red cap.
- For Back tire:
- Remove the bottle cap and pour the contents of 2oz bead bag into the bottle.
- Put the bottle cap back on the bottle and attach the clear tube to the bottle cap spout.
- Rotate
the wheel so the valve stem is at the bottom, remove the valve core
using the provided tool, allow the tire to deflate, check that the valve
stem is not obstructed, then place one end of the clear tube over the
valve stem.
- Invert the Tyrebeads bottle and squeeze repeatedly to get all the TyreBeads to flow down the clear tube into your tire.
- Once
the beads are inside the tire, screw in the provided valve core into
the valve stem, re-inflate the tire, and screw on the provided red cap.
- Note:
You can use vibration (by pressing an engraver or sander against the
stem) or an air compressor to get the beads to go through the valve stem
faster.
Other Kit Size Options: