Description:

Condition:100% Brand New and 100% Quality Tested?

• Item Type: Radiator
• Height: 15-3/4 In.
• Width: 27-3/8 In.
• Thickness: 5/8 In.
• Weight: 10bs
• Core Material: Aluminum
• Tank Material: Plastic

Package Included:

1x High Quality Radiator

Fits Vehicles of the Following Years and Make:

• 2003-2007 Honda Accord 2.4L

The main purpose:

• The water tank is the heat exchanger of a water-cooled engine, which uses air convection cooling to maintain the engine's normal operating temperature.
• Once the engine cooling water in the water tank boils due to high temperature and vaporizes and expands, and the pressure exceeds the set value, the water tank cover overflows and relieves the pressure, which reduces the cooling water and prevents the cooling system pipeline from bursting.
• In normal driving, you should pay attention to whether the pointer of the engine cooling water temperature gauge on the dashboard is normal.
• Others, such as the engine cooling fan failure, which causes the engine cooling water temperature to rise or the cooling system pipeline leakage may also cause the cooling water to decrease.
• Please pay attention to the decrease of the cooling water and whether the cycle is normal before adding distilled water.

What to do if the car water tank leaks?

1. Check whether the water tank cover of the car is closed tightly. If it is not fastened, the water tank cover should be fastened, and then check whether the leakage of the car water tank is improved.

2. Fill the water tank with gas, and the water in the water tank will seep out under pressure, so as to know where the car water tank is leaking, and then formulate a repair method.

3. Open the engine oil cover to see if there are traces of emulsification in the oil inside. If there are traces of emulsification, you should immediately disassemble the engine and replace the cylinder gasket.

4. During the driving of the car, if the water tank ruptures due to a traffic accident or severe vibration, you can add a strong plugging agent to the water tank, or you can put some loose tobacco into the water tank to block the leak. Can solve the problem temporarily, and then go to the repair shop to repair according to the actual situation.

Steps to Replace the Car Radiator:

Step 1 

Remove the wire harness clip inside the beam on the upper part of the water tank, and remove the wire harness

Step 2 

Disassemble the air filter assembly and remove the control computer

Step 3 

Remove the headlight on the right

Step 4 

Remove the fan frame assembly

Step 5 

Unscrew the drain bolt at the bottom of the water tank and collect the coolant

Step 6 

Disassemble the upper and lower water pipes

Step 7 

Remove the fixing bolts of the water tank

Step 8 

Take out the water tank at a certain angle and reinstall it in the reverse step.