2x Icepure Water Filter - RWF0600A - For GE KENMORE 46 9991 MWF - New - Sealed.

Please see photos. All information below was taken from the outside of the box

Replaces GE Kenmore Refrigerator Filter:

MWF, 469991, 469996

Claims of compatibility verified through manufacturer testing.

Replacement Filter

RWF0600A

This Filter is for System Model

RWF0600A-S

Tested and Certified by NSF International against NSF/ANSI

Standard 42 in model RWF0600A-S for the reduction of chlorine, taste and odor.

REPLACEMENT ELEMENT

Certified by lAPMO R&T against NSF/ANSI 42 standard for material safety, structural integrity and aesthetic chlorine reduction when used in the RWF0600A-S. Replacement component RWF0600A certified by lAPMO R&T to NSF/ANSI 372 standard for Lead free compliance.

Installation instructions below

1. On models without a replacement indicator light, apply the month sticker to the new cartridge and mark your calendar to remind you to replace the filter after six months.

2. Remove old filter cartridge by grasping and turning to the left about 1/4 turn.

3. Remove the protective foil from the top of the new filter.

4. Place the new filter on your palm, align up with the filter receptor, push the filter up and then turn 1/4 to the right until the filter stops. Do not over tighten. As you turn the cartridge it will automatically raise and insert it into position.

5. Run water from the dispenser for 6-8minutes (about 3-4 gallons) to clear the system, prevent sputtering, and condition the new filter.

6. On models with a replacement indicator light, press and hold the RESET WATER FILTER PAD above the dispenser.