Dragon 1040 1/350 German Battleship Scharnhorst 1943 Plastic Model Kit 2019
[About the actual ship]
- The German naval cruiser battleship that was active in the Atlantic during the Second World War was Sharunholst.
- Commissioned in 1939. There is Gnaisenau in the same type ship, and both played an active part in the common name destroying operation in the Atlantic Ocean.
- In the Norwegian battle of Norway in 1940, it is sinking the aircraft carrier Glorious of the British navy.
- The standard drainage volume is 31,850 tons, the total length is 235 m, the engine is equipped with three turbine engines, boasting a maximum speed of 31 knots with the addition of a sharp ship form.
- Also, weaponry is also substantial, including 3 28 cm 3 guns and 6 15 cm guns.
- In 1943 participated in the naval battle off Kitakyushu, bombarded with battle with the British battleship Duke of York, damaged, then sunk by torpedo attack. I closed that lifetime.
- In 2000, its appearance was confirmed at the sea floor off Norway and attracted a hot topic.
[About the model]
- The kit reproduced the last time Scharnhorst in 1943.
- It is a large model that will also be about 67 cm in length.
- The hull using the slide mold is firmly modeled with integral molding as well as sharp and well-balanced shape.
- It can be assembled by choosing either the full hulled state which reproduces to the bottom of the ship or the water line state reproducing above from the waterline.
- The deck molds a beautiful line of boards, upper bodies such as bridge bridges and chimneys also use the slide mold to reliably reproduce the shape and pursue ease of assembly.
- For ramps, railings, radar etc. Etching parts are also set and the finish of detail is plentiful in density.
- In addition, the 28 cm 3 turret turret adopts a flexible DS material for the gun barrel base waterproof canvas to enhance the reality.
- Weaponry such as anti-aircraft guns including 15 cm interlocking guns and 10.5 cm 2 consecutive guns, boats such as internal fireplaces are also set and a fulfilling finish.
- And, it is the figure of the crew reproduced on 1/350 scale that I can not miss. Unlike etched parts, it adds a realistic feeling with a three-dimensional feeling reproduction to the kit.
- Posing is also a fun setting such as loading carrying figure and going up stairs.
- It is a large ship model that you can carefully build.
- Please feel astonished detail and a sophisticated modeling level.
[Major features]
- German naval battle cruiser Sharonhorst of World War II reproduced on 1/350 scale
- figures of the crew reproduced on 1/350 scale are included
- Finished Large size of about 67 cm total length
- Full hull model state that reproduces to the bottom of the ship or water line state reproducing above from the waterline can be selected
- Deck mold molds beautiful lines of boards
- Bridge bases, superstructures such as chimneys also reliably reproduce shapes using slide molds in part
- Etched parts also set for the thraps, handrails, radar etc. Detailed precision finish - 28 cm 3 turret turret adopts flexible DS material for gun barrel base waterproof canvas to improve reality - 15 cm interlocked cannon and 10.5 cm 2 interlocking Weapons such as anti-aircraft guns and other weapons, as well as boats such as internal fireplaces set
- Size at completion: Total length of about 670 mm
- The German naval cruiser battleship that was active in the Atlantic during the Second World War was Sharunholst.
- Commissioned in 1939. There is Gnaisenau in the same type ship, and both played an active part in the common name destroying operation in the Atlantic Ocean.
- In the Norwegian battle of Norway in 1940, it is sinking the aircraft carrier Glorious of the British navy.
- The standard drainage volume is 31,850 tons, the total length is 235 m, the engine is equipped with three turbine engines, boasting a maximum speed of 31 knots with the addition of a sharp ship form.
- Also, weaponry is also substantial, including 3 28 cm 3 guns and 6 15 cm guns.
- In 1943 participated in the naval battle off Kitakyushu, bombarded with battle with the British battleship Duke of York, damaged, then sunk by torpedo attack. I closed that lifetime.
- In 2000, its appearance was confirmed at the sea floor off Norway and attracted a hot topic.
[About the model]
- The kit reproduced the last time Scharnhorst in 1943.
- It is a large model that will also be about 67 cm in length.
- The hull using the slide mold is firmly modeled with integral molding as well as sharp and well-balanced shape.
- It can be assembled by choosing either the full hulled state which reproduces to the bottom of the ship or the water line state reproducing above from the waterline.
- The deck molds a beautiful line of boards, upper bodies such as bridge bridges and chimneys also use the slide mold to reliably reproduce the shape and pursue ease of assembly.
- For ramps, railings, radar etc. Etching parts are also set and the finish of detail is plentiful in density.
- In addition, the 28 cm 3 turret turret adopts a flexible DS material for the gun barrel base waterproof canvas to enhance the reality.
- Weaponry such as anti-aircraft guns including 15 cm interlocking guns and 10.5 cm 2 consecutive guns, boats such as internal fireplaces are also set and a fulfilling finish.
- And, it is the figure of the crew reproduced on 1/350 scale that I can not miss. Unlike etched parts, it adds a realistic feeling with a three-dimensional feeling reproduction to the kit.
- Posing is also a fun setting such as loading carrying figure and going up stairs.
- It is a large ship model that you can carefully build.
- Please feel astonished detail and a sophisticated modeling level.
[Major features]
- German naval battle cruiser Sharonhorst of World War II reproduced on 1/350 scale
- figures of the crew reproduced on 1/350 scale are included
- Finished Large size of about 67 cm total length
- Full hull model state that reproduces to the bottom of the ship or water line state reproducing above from the waterline can be selected
- Deck mold molds beautiful lines of boards
- Bridge bases, superstructures such as chimneys also reliably reproduce shapes using slide molds in part
- Etched parts also set for the thraps, handrails, radar etc. Detailed precision finish - 28 cm 3 turret turret adopts flexible DS material for gun barrel base waterproof canvas to improve reality - 15 cm interlocked cannon and 10.5 cm 2 interlocking Weapons such as anti-aircraft guns and other weapons, as well as boats such as internal fireplaces set
- Size at completion: Total length of about 670 mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 73.6 x 27.1 x 11.3 cm / 1579g
Dragon 1040 1/350 German Battleship Scharnhorst 1943 Plastic Model Kit 2019
[About the actual ship]
- The German naval cruiser battleship that was active in the Atlantic during the Second World War was Sharunholst.
- Commissioned in 1939. There is Gnaisenau in the same type ship, and both played an active part in the common name destroying operation in the Atlantic Ocean.
- In the Norwegian battle of Norway in 1940, it is sinking the aircraft carrier Glorious of the British navy.
- The standard drainage volume is 31,850 tons, the total length is 235 m, the engine is equipped with three turbine engines, boasting a maximum speed of 31 knots with the addition of a sharp ship form.
- Also, weaponry is also substantial, including 3 28 cm 3 guns and 6 15 cm guns.
- In 1943 participated in the naval battle off Kitakyushu, bombarded with battle with the British battleship Duke of York, damaged, then sunk by torpedo attack. I closed that lifetime.
- In 2000, its appearance was confirmed at the sea floor off Norway and attracted a hot topic.
[About the model]
- The kit reproduced the last time Scharnhorst in 1943.
- It is a large model that will also be about 67 cm in length.
- The hull using the slide mold is firmly modeled with integral molding as well as sharp and well-balanced shape.
- It can be assembled by choosing either the full hulled state which reproduces to the bottom of the ship or the water line state reproducing above from the waterline.
- The deck molds a beautiful line of boards, upper bodies such as bridge bridges and chimneys also use the slide mold to reliably reproduce the shape and pursue ease of assembly.
- For ramps, railings, radar etc. Etching parts are also set and the finish of detail is plentiful in density.
- In addition, the 28 cm 3 turret turret adopts a flexible DS material for the gun barrel base waterproof canvas to enhance the reality.
- Weaponry such as anti-aircraft guns including 15 cm interlocking guns and 10.5 cm 2 consecutive guns, boats such as internal fireplaces are also set and a fulfilling finish.
- And, it is the figure of the crew reproduced on 1/350 scale that I can not miss. Unlike etched parts, it adds a realistic feeling with a three-dimensional feeling reproduction to the kit.
- Posing is also a fun setting such as loading carrying figure and going up stairs.
- It is a large ship model that you can carefully build.
- Please feel astonished detail and a sophisticated modeling level.
[Major features]
- German naval battle cruiser Sharonhorst of World War II reproduced on 1/350 scale
- figures of the crew reproduced on 1/350 scale are included
- Finished Large size of about 67 cm total length
- Full hull model state that reproduces to the bottom of the ship or water line state reproducing above from the waterline can be selected
- Deck mold molds beautiful lines of boards
- Bridge bases, superstructures such as chimneys also reliably reproduce shapes using slide molds in part
- Etched parts also set for the thraps, handrails, radar etc. Detailed precision finish - 28 cm 3 turret turret adopts flexible DS material for gun barrel base waterproof canvas to improve reality - 15 cm interlocked cannon and 10.5 cm 2 interlocking Weapons such as anti-aircraft guns and other weapons, as well as boats such as internal fireplaces set
- Size at completion: Total length of about 670 mm
- The German naval cruiser battleship that was active in the Atlantic during the Second World War was Sharunholst.
- Commissioned in 1939. There is Gnaisenau in the same type ship, and both played an active part in the common name destroying operation in the Atlantic Ocean.
- In the Norwegian battle of Norway in 1940, it is sinking the aircraft carrier Glorious of the British navy.
- The standard drainage volume is 31,850 tons, the total length is 235 m, the engine is equipped with three turbine engines, boasting a maximum speed of 31 knots with the addition of a sharp ship form.
- Also, weaponry is also substantial, including 3 28 cm 3 guns and 6 15 cm guns.
- In 1943 participated in the naval battle off Kitakyushu, bombarded with battle with the British battleship Duke of York, damaged, then sunk by torpedo attack. I closed that lifetime.
- In 2000, its appearance was confirmed at the sea floor off Norway and attracted a hot topic.
[About the model]
- The kit reproduced the last time Scharnhorst in 1943.
- It is a large model that will also be about 67 cm in length.
- The hull using the slide mold is firmly modeled with integral molding as well as sharp and well-balanced shape.
- It can be assembled by choosing either the full hulled state which reproduces to the bottom of the ship or the water line state reproducing above from the waterline.
- The deck molds a beautiful line of boards, upper bodies such as bridge bridges and chimneys also use the slide mold to reliably reproduce the shape and pursue ease of assembly.
- For ramps, railings, radar etc. Etching parts are also set and the finish of detail is plentiful in density.
- In addition, the 28 cm 3 turret turret adopts a flexible DS material for the gun barrel base waterproof canvas to enhance the reality.
- Weaponry such as anti-aircraft guns including 15 cm interlocking guns and 10.5 cm 2 consecutive guns, boats such as internal fireplaces are also set and a fulfilling finish.
- And, it is the figure of the crew reproduced on 1/350 scale that I can not miss. Unlike etched parts, it adds a realistic feeling with a three-dimensional feeling reproduction to the kit.
- Posing is also a fun setting such as loading carrying figure and going up stairs.
- It is a large ship model that you can carefully build.
- Please feel astonished detail and a sophisticated modeling level.
[Major features]
- German naval battle cruiser Sharonhorst of World War II reproduced on 1/350 scale
- figures of the crew reproduced on 1/350 scale are included
- Finished Large size of about 67 cm total length
- Full hull model state that reproduces to the bottom of the ship or water line state reproducing above from the waterline can be selected
- Deck mold molds beautiful lines of boards
- Bridge bases, superstructures such as chimneys also reliably reproduce shapes using slide molds in part
- Etched parts also set for the thraps, handrails, radar etc. Detailed precision finish - 28 cm 3 turret turret adopts flexible DS material for gun barrel base waterproof canvas to improve reality - 15 cm interlocked cannon and 10.5 cm 2 interlocking Weapons such as anti-aircraft guns and other weapons, as well as boats such as internal fireplaces set
- Size at completion: Total length of about 670 mm
( This is a machine translation. Please allow for possible misinterpretations in the text. )
Item Size/Weight : 73.6 x 27.1 x 11.3 cm / 1579g
On Oct 6, 2024 at 19:27:55 PDT, seller added the following information: