** Please Check Your Wheel and Model Together **

** Compatibility Chart is for Thread Pitch Check Only **

** Wheel Lug Shape is Determined by Your Wheel Requirements **

** Do not Guarantee Fitment with Wheel Cap **

** Stock Wheel Requires 7/8" Hex Lug (Large Seat) May Not Fit **

** SUV/VAN Models May Need to Use Taller Size, Or Trim Stud to Use **


Product Specification:

About Lug Nut

Lug Nut Thread Pitch: M14x1.5

Lug Nut Seat Type: 60 Degree Cone Seat

Lug Nut Hex Size: 6 Spline 0.8"

Lug Nut Overall Diameter: 0.8"(20mm)

Lug Nut Overall Height: 1.4"(35mm)

Lug Nut Thread Depth: 1.25"(32mm)

Lug Nut Finish: Chrome

Lug Nut Material Made: SCM Steel


About Socket Key

Socket Type: 6 Spline Tuner Lug Nuts Socket

Socket Drive: 13/16" & 3/4" Hex Drive

Socket Fit Lug Nuts: 6 Spline Typed Lug Nuts

Socket Overall Diameter: 0.85"(21mm)

Socket Overall Length: 3.55"(90mm)

Socket Material Made: SCM Steel

Max Torque Power: 100 ft-lb


Requirements of the Vehicle Specification

Required Vehicle Hub Thread: M14x1.5

Maximum Wheel Stud Length: 1.25"(32mm)

*If Your Stud is Longer Than the Maximum Allowance, You MUST Trim the Stud.


Requirements of the Wheel Specification

Required Vehicle Wheel Lug Nuts Seat Type: Cone Seat

Required Vehicle Wheel Lug Nuts Hex: 3/4" or Smaller


Requirements of the Wrench Size

Required Wrench Socket Size: 6 Splined (Provided)

  

What You Will Receive:

20    pcs Lug Nuts

1      pc  Socket Key

 

Compatibility Chart and Important Part Note:

Please Carefully Check for Generation information


MakeModelYear MadeGenerationSpecial Note
TeslaModel 32017-2022No Wheel Cover
TeslaModel S2012-2022No Wheel Cover
TeslaModel X2015-2022No Wheel Cover
TeslaModel Y2020-2022No Wheel Cover


Return & Exchange Policy:

Your happiness with the product is our top concern. We allow returns based on the following rules:

 

Shipping:

Warranty:

Disclaimer: