Launch X-Prog 3 Advanced Immobilizer & Progarmmer tool for X431 V+ V PRO,PAD VII
Buyers Please Note:
If you need to return the item for some reasons, please contact us via eBay message at the first time to get the RMA#,and return address instead of sending back directly without permission,I am afraid we can't receive the goods and give you a refund. I hope you can understand and cooperate with us. Thank you so much!
Launch X431 GIII X-PROG 3 Advanced Immobilizer & Key Progarmmer XPROG 3 Chip Reader
X-PROG 3 advanced immobilizer & key progarmmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification, Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.
Highlights:
1. All-in-One Key Progarmmer. Integrates Multiple Function Models
2. Reads & Writes Most Engine/ Gearbox E-C-Us Without Disassembling the Shell
3. Compatible with Multiple X-431 Series Diagnostic Tablet: X-431 V, X-431 V+, X-431 PAD V, X-431 PAD VII, X431 PRO 5, X431 PROS V4.0, etc
4. Supports V-W/ AUDI MQB Platform Engine E-C-U Replacement or Cloning (Read engine E-C-U data directly from the key).
5. Works with Reprogarmming Device to Backup/ Restore Progarmming Data (For Bosch/Siemens engine E-C-U).
6. Enables Reading/ Writing EEPROM, On-Board MCU and BMW CAS4+/ FEM Chips, Mercedes-Benz Infrared Keys, Generating Special Keys, Reading BMW Engine ISN Code.
Launch GIII X-Prog 3 Features:
1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/ writing EEPROM, on-board MCU and BMW CAS4+/FEM chips, Mercedes-Benz infrared keys, generating special keys, reading BMW engine ISN code.
2. Supported brands: Fit For V-W, AUDI, SKODA, SEAT, BMW, MERCEDES-BENZ, TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, L-ock System, etc.
4. Compatible with: X431 V, X431 V+, X431 ProS, X431 PRO GT, X431 PRO V4.0, X431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
5. Reads & writes most Engine/ Gearbox E-C-Us without disassembling the shell
Update Note:
Launch X431 GIII X-Prog 3 latest update for RESET PROG (V10.05) Function:
1) Added E-C-U reading and writing functions for 10 models of Siemens Engine including MSD80, MSD81, MSD85, MSD87, MSV90, SIM271DE, SIM271KE, SIMOS8.4, SIMOS8.5 and SIMOS8.6;
2) Added E-C-U reading and writing functions for 5 models of Transmission including 9G_Tronic, DQ380, AL551, AL450 and 8HPXX.
Launch GIII X-Prog 3 Advantages:
1. Supports V-W/AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
2. Supports V-W/AUDI MQB platform gearbox E-C-U replacement or cloning.
3. Supports E-C-U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
5. Supports BMW E chassis 8HP gearbox E-C-U reprogarmming to empty.
6. Works with reprogarmming device to backup/restore progarmming data (For Bosch/Siemens engine E-C-U).
Supported Brands
Fit For V-W, For Audi, For Skoda, For SEAT, For BMW, For Mercedes-Benz, For Toyota… (updates to be continue)
Supported Systems
Engine system, automatic transmission, instrument system, CAS, body system, l-ock system…
Compatible With
X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
Core Functions
1. Integrated the functions of key matching/ copy, anti-theft IC reading & writing, and E-C-U reading & writing, etc.
2. Supports common E-C-U/ MCU/ EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports E-C-U replacement for all lost without disassembly for V-W/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports E-C-U replacement for the fourth-generation of V-W/ AUDI engine;
5. Supports E-C-U replacement for the fifth-generation of V-W/ AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of AUDI EZS, comfortable E-C-U, and KESSY IC.
7. Supports the BMW F and G chassis 8HP gearbox E-C-U reprogarmming to empty.
8. Supports the BMW CAS4/CAS4+ module replacement.
9. Supports the E-C-U cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.
12. Supports V-W/ AUDI MQB platform engine E-C-U replacement or cloning (Read engine E-C-U data directly from the key).
13. Supports E-C-U replacement for the fifth-generation of Audi (0AW/0B5) gearbox.
14. Supports reading, writing & cloning the E-C-U for the fourth-generation of V-W UDS engine.
15. Supports BMW E chassis 8HP gearbox E-C-U reprogarmming to empty.
16. Works with reprogarmming device to backup/ restore progarmming data (For Bosch/ Siemens engine E-C-U).
Supported E-C-U MCU List:
(Support more than 1000 models, keep updating)
For Atmel | For NSC |
For Fujitsu | For Philips |
For Infineon | For Renesas M16 |
For MC68HC05 | For Renesas M32 |
For MC68HC08 | For Renesas M32R |
For MC68HC11 | For Renesas R32C |
For MC68HC12 | For Renesas R8C |
For MediaTek | For Renesas V850 SPI |
For MicroChip | For Renesas V850 UART |
For Nordic | For Samsung |
For ST | For SiLabs |
Support EEPROM List:
support more than 1000 models, keep updating
4Wire | GI | Numonyx | SST |
Adesto | GigaDevice | OKI | ST |
AKM | Grundig | ON Semi | Toshiba |
Altera | HOLTEK | Other | Winbond |
Amic | Hynix | PCT | Xicor |
Atmel | I2C | Philips | xUSSR |
B-OSCH | ITT | Pioneer | YMC |
Catalyst | KHIC | PMC | Spansion |
Chingis | Macronix | Ramtron | SPI |
Dallas/Maxim | MicroChip | Rohm | NEC |
EON | Micron | Samsung | NSC |
ESMT | MicroWire | Seiko | Ford |
EXEL | Mitsubishi | Siemens | Fujitsu |
Fairchild | Motorola | Sony |
How to Use X-PROG3 to Read and Write Data?
Method 1: Directly connect to OBD16 for key matching, data reading and writing, etc
Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the immobilizer progarmmer l-ocker and l-ock it to realize the data interaction between the IC anti-theft chip and the diagnostic host
Method 3: After removing the E-C-U from the car, connect the anti-theft E-C-U pin to the DIY slot of the immobilizer progarmmer through the cable to realize the data interaction between the anti-theft E-C-U and the diagnostic host.
Launch X-Prog vs X-Prog 3
Item Name | X-prog | X-Prog 3 |
EEPROM Read and Write | × | √ |
MCU Read and Write | × | √ |
Mercedes Benz Key | × | √ |
Key Simulator | × | √ |
V-W 4th instrument disassembly/reading/all lost | × | √ |
Read Engine via Bench Mode | × | √ |
Read Engine via Boot Mode | × | √ |
V-W 4th All Key Lost without Account | × | √ |
Read Gearbox | × | √ |
Read and Write Key | √ | √ |
Read BMW ISN | × | √ |
Read CAS4+/FEM Chip | × | √ |
Audi 5th generation steering column chip reading and writing | × | √ |
Replace OBD Reading Component | √ | √ |
Specification:
Interface | DB26, DB15 |
Input Power | DC12V |
Working CurrentMax | 500mA |
Power Consumption | 5W |
Storage Temperature | -20℃~70℃ |
Working Temperature | 0℃~50℃ |
Package List:
1pc x Launch X-PROG 3
1pc x Power adaptor
1pc x Main diagnostic cable
1pc x The fourth-generation data acquisition cable
1pc x The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)
1pc x BENCH mode cable
1pc x MCU converter V1
1pc x MCU converter V2
1pc x MCU cable with multiple leads
1pc x EEPROM chip adaptor
1pc x Benz infrared analog acquisition key
1pc x MCU cable with multiple leads
1pc x EEPROM converter
1pc x User ManualA