For sale a top model Victor/JVC JL B77 direct drive turntable with Denon tonearm. Turntable has a separate Pitch Control for each speed and keeps speed well , no issues. Tonearm "cue" works properly without dropping. Turntable comes with working Victor cartridge and ready to play your records. DESCRIPTION ( from website): JL-T77 has been adopted for the turntable. The JL-T77 uses a 20-pole, 60-slot, 6-phase DC direct drive motor for its drive motor. It uses a contactless Hall element servo and Victor's unique sine wave drive system to enable quiet rotation. In addition, the turntable is finished with a die-cast aluminum alloy turntable with careful dynamic balance one by one, and the rubber covering is finished into a unique shape of a mortar with consideration of adhesion to both turntable and record. JL-C77 is used for the cabinet. JL-C77 has a laminated structure consisting of high-density beech wood bonded with special vinyl adhesive to a thickness of 60 mm. The motor and arm parts are hollowed out to control internal vibration as well as external vibration. A 7 mm thick aluminum alloy plate is used for the pickup board part to reduce vibration. This board can be attached and detached, and the arm can be exchanged for each board by using a spare sold separately. Thick acrylic dust cover is used to suppress howling. The dust cover has a free hinge that allows it to be held at any angle, and the hinge is attached to the cover so that when it is removed and used, it leaves no obstructions in the rear. A special rubber insulator with adjustable height is used for the leg part. SPECIFICATIONS: Turntable Section (JL-T77) Motor - 20-pole hole servo motor Drive system - Direct drive system Turntable - 31 cm Aluminum Die Cast Number of revolutions - 33 1/3, 45 rpm Rotational speed fine adjustment range - + / - 3% Start-up characteristic - Normal operation at 1/2 rotation Wow flutter - 0.03%WRMS Signal-to-noise ratio - 60dB Cabinet Section (JL-C77) Cabinet - 60 mm thick beech Dust cover - Acrylic Free Hinge Foot - Height Adjustable Pick-up board - 7 mm Thick Aluminum Board External dimensions - Width 490 x Height 190 x Depth 425 mm Weight 17.0kg Check my other ads for more quality vintage electronics.