eBay

Please note these stickers will only stick to SMOOTH non-porous clean surfaces, eg glass, varnished wood, metal and plastic :)

Please see the COLOUR CHART picture for your choice of colour.

Once decided please use the drop down box to select :)

Thank you for looking at my shop :)

Measurements are in the pictures

EASY APPLICATION
Please Note - Before applying sticker the surface must be clean and dry
STEP 1

Make sure that you clean the area thoroughly with soap and water then dry.

STEP 2

Prepare the sticker for application by firmly rubbing a bank card or similar across the length of the sticker. This makes the sticker cling to the application tape.

STEP 3

Slowly peel the paper backing off of the sticker. All parts of the sticker should now be on the application tape. If any parts of the sticker cling to the backing, slowly replace the paper and repeat step 2

STEP 4

Place the sticker onto the desired surface and rub it in place firmly with a bank card or similar.

For best results wait a few minutes before moving on to the next step

STEP 5

Slowly peel the backing paper off at an angle. Be careful not to pull the sticker off the surface. If the sticker pulls away from the surface please repeat the previous step.