Why purchase a recycled keyless entry remote transmitter?

The vehicle keyless remote key fob you are going to purchase from us is pre-owned; aka: used, previously loved ;). We recycle OEM and aftermarket keyfobs and put them through a concise refurbishing process so we can guarantee our products are delivered to you in a ready-to-program state. We offer these car clickers at a significant cost savings to stealerships so you can keep your hard earned cash for something more fun while lightening your ecological footprint J. We call that a win-win! Why wait? Add some convenience to your daily routine and help save the environment, order your recycled car remote control today!

What are you purchasing?

This is ONE (1) Factory OEM (Original Equipment Manufacturer) keyless entry remote, aka "key fob" that will work with your OEM Factory installed RKE system.

Compatibility: Works with vehicles that use a factory keyless entry system listed in our compatibility section above AND below.

FCC ID#(s)

for FCC ID A269ZUA078

A269ZUAO78

Alternate Spellings

for A26-9ZUA078, A26 9ZUA078, A269ZUA078, A269ZUAO78

for Alpine Electronics Inc Keyless Entry System 9ZUA078

Part #(s)

for Part #: MODEL NO.: CA32 

for ISC: 700 K1359

Frequency; 433MHz 433 MHz


for CA32 MODEL ISC: 700 K1359

Dealer #(s)

for 28268-40U15 2826840U15 for 28268-4oU15 282684OU15 for 28268-40UI5 2826840UI5 for 28268-4OUI5 4OUIS

Compatible Vehicles

FOR THIS FCC ID / PART #

for Infiniti I30
Years: 1995 1996 1997 1998 1999

for Infiniti J30
Years: 1995 1996 1997 1998 1999

for Infiniti J30t
Years: 1995 1996 1997 1998 1999

1995 1996 1997 1998 1999 for  Infiniti I30 (Infinity)

1995 1996 1997 1998 1999 for Nissan Maxima

Button Count

4: Unlock, Lock, Trunk Release, Panic

Battery (installed)

 1; CR2025

Frequency

434 MHz

Programming:

Please note not all customers will be able to complete the programming on their own so if you are having trouble or unsure diagnostic programming is available at your local qualified automotive locksmith or car/audio shop.

1.   Close and lock all doors with the driver’s side power lock/unlock switch.
 
2.   Insert key into ignition and remove it from the ignition key cylinder at least six times within 10 seconds. Your Hazard Lamps will flash if you have performed this step successfully. NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast, system will not enter programming mode.

3.   Insert key into the ignition cylinder and turn to the ACC position.

4.   Within 5 seconds, push ANY button on the remote transmitter. Your Hazard Lamps should flash. NOTE: Do not press the button more than one time in the above step. If the button is pressed more than one time, the programming procedure will not be successful.

5.   If there are any remaining transmitters (including the old ones), unlock then lock all doors using the driver’s side power lock/unlock switch and within 5 seconds, push ANY button on the next remote. Your Hazard Lamps should flash. Repeat this step for each transmitter (including any existing transmitters).

 

6.   Turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door.

.

Condition Notes

Pre-Owned; ready to be programmed to your vehicle installed compatible RKE system. The remote you will receive will have faded button graphics and the original key ring loop is broken off and a hole has been drilled to securely hold the installed keyring loop. See photos

Installed RKE System Type:

Please be sure you have a FACTORY (RKE) remote keyless entry system. It was not standard on all vehicles. If your current remote looks the same then this will work. Other options include: Dealer Installed or Aftermarket. The system installed in your vehicle will CHANGE the required remote. If you are unsure ask your local dealer they will need your VIN # (Vehicle Identification Number (located on our vehicle registration car, on your driver side door jam, or your windshield (lower left drives side))).

Why does your vehicles installed RKE / Security system determine which remote control your can purchase?

The remotes job is to pair with your vehicles installed RKE system. It will only sync to a matching system; therefore, you cannot purchase a different type of remote than the remote manufactured with the system. It will not pair with a foreign system.

Programming:

We will send you information on how to locate programming requirement/instructions for your make, model, and year vehicle. Some vehicles have DIY (do-it-yourself) programming instructions available. While other vehicles require diagnostic programming which is available at your local qualified automotive locksmith or dealer.

Programming Requirement Information NOTE:

The vehicle manufacturers determine the programming requirements at the time of manufacture. We pass the programming requirements / instructions on to you as a courtesy. We do not write the programming nor do we determine which vehicles require diagnostic programming and which vehicles can be programmed by the you (DIY). We are not locksmiths nor mechanics nor are we familiar with EVERY vehicles program sequence. If you have questions:

        1. Check your Vehicle Owners Manual for OEM Factory remotes or The User Manual for Dealer Installed or Aftermarket RKE systems.

 2. YouTube has many video postings from do-it-yourselfers to assist with all kinds of questions & most customers find if very helpful to WATCH the programming being done which can eliminate mistakes in the sequence.

To locate the programming for your vehicle via this method go to YouTube and once there in the search bar type in the following:

i.      If you have a factory RKE system: your make model year + the words program remote (i.e.: 2005 Ford Mustang program remote)

ii.      If you have a dealer installed or aftermarket RKE system: the FCC ID or system type + the words program remote (i.e.: ELVAT5C program remote or AS200 program transmitter?)

 3. For OEM FACTORY installed systems: send us an eBay message with your vehicles make, model & year = we can pass on to you any programming information requirements we have on hand.

      

 4. For DEALER INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# and the vehicles make, model, & year = we can pass on to you any programming information requirements we have on hand (the programming for dealer installed RKE systems will be different than Factory or Aftermarket installed RKE systems).

     

 5. For AFTERMARKET INSTALLED RKE installed systems: send us an eBay message with your remote controls FCC ID # and PART# = we can pass on to you any programming information requirements we have on hand (the programming for aftermarket installed RKE systems will be different than Factory or Dealer installed RKE systems).

      

6. There are also many auto forums that you can go onto by just conducting a google search with your questions.

       

7.  or a local automotive locksmith or your local parts/car/audio store will typically be able to assist you if you are trying to avoid the dealer.