Please rest assured that the carburetor is suitable for fuel containing a small amount of ethanol
The carburetor passed the engine test in the factory, and the quality of the product is fully qualified. The carburetor is installed on engines of different ages, and the carburetor needs to be fine-tuned.Carburetor Be applicable to 1963-1968 ford 170/200 straight 6 cyl engine
If after the engine is started carburetor leaks gas through the top, do not worry,The float.may be stuck.If you remove the top plate the float will be visible. If it's stuck, holding the needle valve open. Replacement of the needle and seat my be necessary, or a possible minor adjustment of the float may cure the problem.
After installing the carburetor, if the fuel mixture is too rich and the exhaust pipe emits black smoke, it is necessary to adjust the idle mixing screw to reduce the fuel injection. If you are not good at adjustment, please send me an email through ebay, I will provide adjustment methods.
Before purchase, please check carefully whether the carburetor you need to replace is the same as this product. If necessary, please ask us or local professional auto repair personnel.
Mounting aperture 10.5mm 2 hole spacing 68mm，This order contains a gasket mounted on the carburetor base
When the carburetor idle speed adjustment is not good, one of the adjustment methods is: Move the tail of the side of the link located at the acceleration pump position to the outside, do not keep it close to the accelerator pump diaphram position, but use pliers to pull it to the outside . In this way, during the linkage, the lever on the top of the carburetor can push the spring into the innermost, and the idle speed may return to normal.
France packaging law registration number UIN：FR255195_01RBDC