A complete kit for replacing the protective film for the LCD screen of a 3D printer matrix.

The film is universal and can be suitable for printers with a screen size (select the size you need):

- 5.5 inches (115x65mm) for Anycubic photon, etc. <<<===  If you want to purchase this size please follow the link below (https://www.ebay.com/itm/355041398634)

- 6.08 inches (130x80mm) for Anycubic photon mono and Elegoo mars 2 pro, etc. <<<=== If you want to purchase this size please follow the link below (https://www.ebay.com/itm/355041402919)

- 6.23 inches (132x80mm) for anycubic photon mono 4k, etc.  <<<=== If you want to purchase this size please follow the link below (https://www.ebay.com/itm/355041417281)

- 6.6 inches (143x90mm) for Anycubic foton mono 2, Elegoo mars 3 pro etc. <<<=== If you want to purchase this size please follow the link below (- 7 inches (153x78mm) for Elegoo Mars 4 ultra, etc. <<<=== If you want to purchase this size please follow the link below (https://www.ebay.com/itm/355365801425)

- 7.6 inches (163x102mm) for Anycubic photon M3, etc. <<<=== If you want to purchase this size please follow the link below (https://www.ebay.com/itm/355044617262)

- 8.9 inches (192x120mm) for Elegoo saturn, Anycubic photon mono X, Voxelab Proxima, etc. <<<=== If you want to purchase this size please follow the link below (https://www.ebay.com/itm/355044831920)

- 9.1 inches (196x122mm) for anycubic photon mono X2, etc. <<<=== If you want to purchase this size please follow the link below (https://www.ebay.com/itm/355044846798)

- 9.25 inches (197x122mm) for Anycubic photon mono X 6K and M3 plus, etc. <<<=== If you want to purchase this size please follow the link below (https://www.ebay.com/itm/355044858164)

- 10 inches (219x123mm) for Anycubic photon mono M3 premium, Elegoo saturn 2, Elegoo saturn 8k, Elegoo saturn 2 pro 8k, information GKTW0, etc. <<<=== If you want to purchase this size please follow the link below (https://www.ebay.com/itm/355044881173)

• 13 inches (300x164mm) for Anycubic photon M3 max, etc. <<<=== This size will be sent to you if you place an order

Instructions for installing the film:

1 - remove old and damaged film from the printer screen

2 - first wipe the printer screen with a damp alcohol cloth and then with a dry cloth (a set of cloths is included). Try to keep dust, dirt, and greasy fingerprints away from the printer screen.

3 - treat the printer screen with the adhesive side of the dust-absorber sticker to completely clean the screen surface.

4 - first check the dimensions of the protective film with the size of the screen. If necessary, cut the film to fit the screen, following the red lines on the protective layer of the film.

5 - remove the protective layer with red lines from the protective film and carefully apply the film to the screen, focusing on one of the sides of the screen.

6 - smooth the protective film over the entire surface of the screen, expelling air bubbles from under the film. Use a non-sharp plastic spatula or plastic card.

7 - remove the protective layer from the remaining side of the film.

8 - stick the shading tape (included) along all four edges of the screen with a slight overlap on the protective film.