Features:
1. [Blind Spot Detection System] There is a blind spot at the rear of the vehicle, which is likely to endanger driving safety! The system is a vehicle auxiliary device that helps the driver to safely change lanes during driving.

2. [Working principle] With the help of 58GHz microwave sensor, detect whether there is a moving object on the side/back of the vehicle entering the blind area of the detection area.

3. [Detection range] Lateral distance: 0.3m-5m (0.98ft-13.1ft); backside distance: 0.3m-10m (0.98ft-32.8ft). When the system is turned on, the system will begin to detect objects in the blind zone 10 x 50 feet behind the vehicle.

4. [Safety protection] When you install BSM on your car, whether it is daytime, night or even snow, as long as there is a moving object entering from the rear of the car, you can get the warning LED light, flashing, and buzzer sound This allows the driver to be cautious when changing lanes to avoid the possibility of a side collision accident.

5. [What will you get] You will receive 1 x control box, 2 x ultrasonic sensors, 2 x blind spot monitors (or LED lights), 1 x main wiring harness with buzzer. This is a DIY product, it is recommended to be installed by professionals. We believe that you will be impressed by our durable and high-quality products!

illustrate:
Ultrasonic blind spot monitoring system detects the radar to eliminate the "blind zone" by installing two radar probes on the rear bumper of the car to detect vehicle speed signals. The system analyzes and processes the transmitted signals to understand the distance, speed, and moving direction of the vehicle behind.
Through the system algorithm, fixed objects and distant objects, when a vehicle is detected close to the blind zone, the indicator light flashes. At this time, the driver cannot see the vehicle in the blind zone, but he can also know that a vehicle is coming from behind and a collision occurs when changing lanes. It is dangerous. If the driver turns on the indicator light and prepares to change lanes without noticing the flashing of the indicator light at this time, the system will issue a BI BI BI alarm to remind the driver again that the lane change time is dangerous and should not be changed.
Throughout the driving process, continuous detection and reminders can prevent traffic accidents caused by potential hazards such as bad weather, driver negligence, blind spots in the rearview mirror, and novices in the driving process.

The basic working principle of the BSD system is: turn on the system when the vehicle is driving. When a vehicle is found within the detection range of the ultrasonic sensor, the LED will light up to remind. When the turn signal is turned on and ready to change lanes, it will make a sound and the LED will be Light up reminder.


Specification:
Type: General Blind Movement Monitoring System (BSM)
Power supply voltage: 12V
Maximum power: 5W (maximum)
Working temperature: -40℃～+85℃
Storage temperature: -40℃～+85℃
Waterproof rating: IP67
Detection range: 0m-5m.
Detection range accuracy: ±3cm

The package includes:
1*controller
2*Radar probe
1*buzzer
1*Main wiring harness
2*LED reminder light
1*Accessory bag
1*Warranty card
1*Instruction