PROGRAMMING STEPS:
How to Program Keyless Entry Remote Fob?
Step by Step How to Program Instructions:
Note: It is necessary to have all of your keyless remotes available prior to beginning this procedure. All keyless remotes not present
during the programming procedure will not work when the programming procedure has been competed.
1. DO NOT depress brake pedal during this programming procedure.
2. Unlock all doors using the power door lock switch on door panel.
3. Turn ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm
programming mode.
4. Within 20 seconds press any button on first keyless remote. Door locks will cycle to confirm programming.
5. Within 20 seconds, press any button on second keyless remote. Door locks will cycle again to confirm programming.
6. Turn ignition to OFF. Locks will again cycle to indicate end of programming mode
Compatibility
Please use the compatibility chart drop down menu above to double check if these will work for your car.
You must have a factory installed keyless entry system for these to work.
This key will work for the vehicles listed in the compatibility chart above.
Your existing key must look the same and have the same button configuration for this to work properly.
Programming
This remote is self programmable. If you do not have a working remote dealer/locksmith programming will be required.
Programming Instructions: https://freeremoteinstructions.com
The steps of programming can be found here based on the your vehicle year, make and model.
Pacakge Includes:
AS the pictrure shows