• Fitment:
    • 2000-2002 Dodge Ram 2500
    • 2000-2002 Dodge Ram 3500
    Why replace ball joints? Ball joints deteriorate if dirt, grit and impurities get inside or grease escapes, leading to a lack of lubrication. Added to this, rusting and general wear and tear also damage these suspension parts. The effects of this deterioration are excessive play and looseness (beyond the manufacturer’s specifications). While healthy ball joints allow for smooth movement from side to side, they shouldn’t wiggle or jolt up and down. This is a clear indicator that you need to look into ball joint replacement.
  • Watch out for these symptoms of worn ball joints:
  • Front Lower Control Arm Ball Joints Suspension Part For 2000-2002 Dodge Ram 2500

    Fitment

    • 2000-2002 Dodge Ram 2500
    • 2000-2002 Dodge Ram 3500

    Why replace ball joints?
    Ball joints deteriorate if dirt, grit and impurities get inside or grease escapes, leading to a lack of lubrication. Added to this, rusting and general wear and tear also damage these suspension parts. The effects of this deterioration are excessive play and looseness (beyond the manufacturer’s specifications). While healthy ball joints allow for smooth movement from side to side, they shouldn’t wiggle or jolt up and down. This is a clear indicator that you need to look into ball joint replacement.

    Watch out for these symptoms of worn ball joints:

    • clunky, knocking noises, particularly when going over bumps
    • creaky or squeaky noises when the suspension moves
    • drifting to the side
    • shaky or loose-feeling steering
    • uneven or premature tyre wear or feathering

    Here are the steps to replace the ball joints on your suspension:

    • Park the car on stable ground in a garage or parking lot
    • Use a car jack to lift the car, and chock the rear wheels so that the car will not roll away.
    • Take off the wheel and place it securely away from the car
    • Undo the brake callipers, brake rotors and all the hydraulics attached to it
    • Take off sway bars that may be attached to the wheel hub
    • Separate the upper control arm and lower control arm from the suspension using a ball joint fork. Detach the steering knuckle and coil spring
    • You may require a mallet to force the steering knuckle away from the ball joint
    • The ball joint needs to be removed from its housing. Take away any snap rings that are holding the ball joint in place
    • The ball joint press should be used to remove the ball joint from the control arm
    • Inspect the ball joint for any signs of damage or defects. A service manual will describe the state of a worn-out ball joint
    • The new ball joint should be pressed into the control arm using the ball joint press

    Notes:

    •   Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile.
    •   Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests.

    Package Includes:

    • 2x Front Lower Ball Joint -K7397

    Item Specifics
    Brand Qualitiparts
    Manufacturer Part Number 11892527
    Type Ball Joint
    Custom Bundle No
    OE/OEM Part Number pressing ball joint car,control arm ball joint
    Manufacturer Warranty 1 Year
    Adjustable Yes
    Features Greasable
    Surface Finish Polished
    Finish Coated
    Placement on Vehicle Lower
    Items Included Mounting Hardware
    Interchange Part Number K7397
    Superseded Part Number front lower ball joints replacement
    Modified Item No
    Kit or Single Part Kit
    OE Spec or Performance/Custom OE Spec
    Quantity 2pcs
    Cotter Pin Hole Yes
    Mounting Style Bolt-On
    Material Alloy Steel
    Performance Part No
    Universal Fitment No
    Vintage Car Part No

    About Us:

    We are committed to making the best autoparts products and providing you with better services.
    So if you have any quesiton or problem, please fell free to contact us about that.

    Payment:

    Paypal and any other payments that will be accpeted by eBay are all available.

    Shipping:

    2-8 working days in transit.
    Product will be shipped within 2 business days after full payment is received and verified.
    USPS, UPS, FedEx shipping will be provided.
    Delivery time is about 2-8 business days to most of addresses.

    Returns:

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    30-day free return provided.

    Contact Us:

    Any quesiton or problem, do contact us please.
    We are always online to answer.
    Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.

    Picture
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us
    Front Lower Control Arm Ball Joints Suspension Part For 2000-2002 Dodge Ram 2500

    Fitment

    • 2000-2002 Dodge Ram 2500
    • 2000-2002 Dodge Ram 3500

    Why replace ball joints?
    Ball joints deteriorate if dirt, grit and impurities get inside or grease escapes, leading to a lack of lubrication. Added to this, rusting and general wear and tear also damage these suspension parts. The effects of this deterioration are excessive play and looseness (beyond the manufacturer’s specifications). While healthy ball joints allow for smooth movement from side to side, they shouldn’t wiggle or jolt up and down. This is a clear indicator that you need to look into ball joint replacement.

    Watch out for these symptoms of worn ball joints:

    • clunky, knocking noises, particularly when going over bumps
    • creaky or squeaky noises when the suspension moves
    • drifting to the side
    • shaky or loose-feeling steering
    • uneven or premature tyre wear or feathering

    Here are the steps to replace the ball joints on your suspension:

    • Park the car on stable ground in a garage or parking lot
    • Use a car jack to lift the car, and chock the rear wheels so that the car will not roll away.
    • Take off the wheel and place it securely away from the car
    • Undo the brake callipers, brake rotors and all the hydraulics attached to it
    • Take off sway bars that may be attached to the wheel hub
    • Separate the upper control arm and lower control arm from the suspension using a ball joint fork. Detach the steering knuckle and coil spring
    • You may require a mallet to force the steering knuckle away from the ball joint
    • The ball joint needs to be removed from its housing. Take away any snap rings that are holding the ball joint in place
    • The ball joint press should be used to remove the ball joint from the control arm
    • Inspect the ball joint for any signs of damage or defects. A service manual will describe the state of a worn-out ball joint
    • The new ball joint should be pressed into the control arm using the ball joint press

    Notes:

    •   Please check the fitment chart above before payment making sure all the suspension parts listed on this page are compatible with your automobile.
    •   Please refer to Moog official website before narrowing down your search so as to avoid unnecessary item not as described return requests.

    Package Includes:

    • 2x Front Lower Ball Joint -K7397
    Item Specifics
    Brand :Qualitiparts
    Manufacturer Part Number :11892527
    Type :Ball Joint
    Custom Bundle :No
    OE/OEM Part Number :pressing ball joint car,control arm ball joint
    Manufacturer Warranty :1 Year
    Adjustable :Yes
    Features :Greasable
    Surface Finish :Polished
    Finish :Coated
    Placement on Vehicle :Lower
    Items Included :Mounting Hardware
    Interchange Part Number :K7397
    Superseded Part Number :front lower ball joints replacement
    Modified Item :No
    Kit or Single Part :Kit
    OE Spec or Performance/Custom :OE Spec
    Quantity :2pcs
    Cotter Pin Hole :Yes
    Mounting Style :Bolt-On
    Material :Alloy Steel
    Performance Part :No
    Universal Fitment :No
    Vintage Car Part :No

    About Us:

    We are committed to making the best autoparts products and providing you with better services.
    So if you have any quesiton or problem, please fell free to contact us about that.

    Payment:

    Paypal and any other payments that will be accpeted by eBay are all available.

    Shipping:

    2-8 working days in transit.
    Product will be shipped within 2 business days after full payment is received and verified.
    USPS, UPS, FedEx shipping will be provided.
    Delivery time is about 2-8 business days to most of addresses.

    Returns:

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
    30-day free return provided.

    Contact Us:

    Any quesiton or problem, do contact us please.
    We are always online to answer.
    Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.


    All rights reserved.