You Are Bidding the Following One

AN10 Oil Line Feed + Drain kit for Turbo Turbo Application

This kit is most complete Oil line kit for NA to Turbo . No Weld is needed on the Oil Pan, All Bolt on.
All flange/fitting are CNC quality, not the Cast Junk ones like others.

Oil Feed is AN4, with AN4 oil feed line, AN4 oil Feed fitting with built in oil restrictor to provide proper oil to turbo.

Drain is AN10, with AN10 drain flange bolt to the turbo and AN10 Bolt on adapter to oil pan (no welding).

This kit Comes with:

- 1x AN10 Aluminum Oil drain return Flange that bolts to Turbo ( 2-Hole-Centerline Distance=51mm or 2") works for many turbos.

- 1x AN4 Aluminum Oil feed Flange (with Oil Restrictor Built in) that bolts to the Turbo (2-Hole-Centerline Distance=38mm or 1.5") works for many turbos.

- 1x AN10 Stainless Oil Return Fitting that bolts to the oil Pan. Our unique design does not require welding on the oil pan, just bolt inside and out.

- 1x AN10 Braided Oil drain return Line, 2 ft long.

- 1x AN4 Braided Oil Feed Line. Comes with 4 way Splitter and cap.

- 2 x AN10 Straight Fitting