** Please Check Your Wheel and Model Together **
** Compatibility Chart is for Thread Pitch Check Only **
** Wheel Lug Shape is Determined by Your Wheel Requirements **
** Do not Guarantee Fitment with Wheel Cap **
** Please Refer the Hight to Your Existing Lugs and Requirements Below **
** Stock Wheel Requires 7/8" Hex Lug (Large Seat) May Not Fit **
** Watch Out Stud Length Requirements, Truck Model May Need to Trim **
Product Specification:
About Lug Nut
Lug Nut Thread Pitch: M14x1.5
Lug Nut Seat Type: 60 Degree Cone Seat
Lug Nut Hex Size: 6 Point Spline 0.8"
Lug Nut Overall Diameter: 0.8"(20mm)
Lug Nut Overall Height: 1.4"(35mm)
Lug Nut Thread Depth: 1.25"(32mm)
Lug Nut Finish: Chrome
Lug Nut Material Made: SCM Steel
About Socket Key
Socket Type: 6 Point Spline Tuner Lug Nuts Socket
Socket Drive: 13/16" & 3/4" Hex Drive
Socket Fit Lug Nuts: 6 Point Spline Typed Lug Nuts
Socket Overall Diameter: 0.85"(21mm)
Socket Overall Length: 3.55"(90mm)
Socket Material Made: SCM Steel
Max Torque Power: 100 ft-lb
Requirements of the Vehicle Specification
Required Vehicle Hub Thread: M14x1.5
Maximum Wheel Stud Length: 1.25"(32mm)
*If Your Stud is Longer Than the Maximum Allowance, You MUST Trim the Stud.
Requirements of the Wheel Specification
Required Vehicle Wheel Lug Nuts Seat Type: Cone Seat
Required Vehicle Wheel Lug Nuts Hex: 3/4" or Smaller
Requirements of the Wrench Size
Required Wrench Socket Size: 6 Point Splined (Provided)
What You Will Receive:
20 pcs Lug Nuts
1 pc Socket Key