※ ※ Model: FFC/FPC flexible flat cable
※ ※ Direction distinction: the same surface: the metal contact points are all on one side; the reverse side: the metal contact points are all on different faces.
※ ※ Overview: Flexible Flat Cable (FFC), also known as Flexible Flat Cable (FFC), can be arbitrarily selected to change the wire and spacing, which makes the connection more convenient, greatly reduces the volume of electronic products, reduces the production of Geben, improves production efficiency, and is suitable for moving parts Used as a data transmission cable between the main board, between the PCB board and the PCB, and in miniaturized electrical equipment.
※ ※ P number/pin position: 24P 20P 18P
※ ※ Pitch: 1.0mm
※ ※ The calculation formula of the total width: (N+1)*spacing=W(mm), for example, the known pin number is 12p (can be counted manually), and the measured width is 13mm, then the spacing is: 13/(12+1) =1mm, that is, you can finally choose a FFC flexible cable with a pitch of 1.0mm and 12pins according to the length you need. You can also consult customer service.
※ ※ Total length: 6CM 10CM 15CM 20CM 25CM 30CM 40CM (optional)
※ ※ Relevant data explanation: 
1: P=bit=core (number of copper wires)
2: Total line length (unit: mm)
3: Spacing (the distance between the middle points of the two lines), the total line width (in mm),
4: Direction: A same direction (metal surface is on the same side), B opposite side (metal surface is on different sides).

 

P number/pin position corresponds to the total width details
P number/pin position	0.5mm Pitch（Width）	1.0mm Pitch（Width）
4p	2.5mm	5mm
6p	3.5mm	7mm
8p	4.5mm	9mm
10p	5.5mm	11mm
12p	6.5mm	13mm
14p	7.5mm	15mm
16p	8.5mm	17mm
18p	9.5mm	19mm
20p	10.5mm	21mm
21p	11mm	22mm
24p	12.5mm	25mm
26p	13.5mm	27mm
32p	16.5mm	33mm
34p	17.5mm	35mm
40p	20.5mm	41mm